Bow Eye (2 Hole) – Weld On
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.
This product is on backorder. Please see our other weld-on eyelet offerings instead.
For bow eyes we recommend This Alternative Product
For general tie downs we recommend This Alternative Product
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Sikaflex – 291 – Marine Sealant
Sikaflex 291 is a professional marine adhesive and sealant used by boat builders around the world. It can be used above and below the waterline, bonds well to metals, woods, and other marine products, and it forms an elastic / vibration resistant bond between components. This grey sealant is also a close color match with surrounding aluminum panels, and it can be sanded and painted to match surrounding areas if required.
We recommend Sikaflex 291 for sealing cable pass throughs, pump adapter plates, and joints between your intake base plate, intake housing, and transom.
Sikaflex 291 is not recommended for use with plastics that are prone to stress cracking (e.g. plexiglass, polycarbonate, etc.)
This product is sold as a 300ml (10.1 fl.oz) tube that is compatible with common caulking guns.
Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Sea-Doo Fuel Pump Weld-In Ring
This Sea-Doo fuel pump mounting ring is CNC cut from billet 6061 series aluminum with internal and external interfaces that match OEM plastic fuel tanks.
Specifically cut with buttress threads that match the OEM fuel pump retainer ring, and an internal diameter that tightly holds the OEM fuel pump gasket, this design is better able to hold a fuel pump in position than other available products.
The wide flange along the bottom edge provides a good accessible weld joint. The flange is also a closer match to most fuel tank materials, making it easier to weld materials of similar thicknesses.
Please note: Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.
Bow Eye – Weld On
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.
This product is on backorder. Please see our other weld-on eyelet offerings instead.
For bow eyes we recommend This Alternative Product
For general tie downs we recommend This Alternative Product
Windscreen Gasket Material
Windscreen gasket material ideal for windows on Minijet high-profile windscreen assemblies.
This rubber gasket material is designed to work with 1/8 inch thickness aluminum panels, and 1/4 inch thickness lexan or glass window inserts. This gasket material allows the lexan or glass insert to sit outside of the aluminum panel so that it can not be pushed inwards by water, waves, or impacts. Lexan or glass inserts must be cut larger than the mating hole in order to make this gasket work correctly. After installation, the outer lip of this gasket can be folded inward on itself, locking the window inserts into position.
- Minimum recommended distance between edge of glass and edge of body panel = 0.140 inch (glass piece should be 2 x 0.140 inch = 0.280 inch larger than the body panel opening).
- Minimum recommended radius of body panel opening = 2.00 inch
- Suitable for body panel thicknesses from 0.075 inch to 0.140 inch
- Suitable for glass panel thicknesses from 0.1875 inch to 0.250 inch
We stock this gasket material as a continuous role and sell it in 1 foot increments. Please use the quantity selector to indicate the length you require in feet.
Blower Hose (3in diameter, 4ft length)
Blower hose is also available as part of our complete blower kit.
Custom lengths are available, please contact us.
Automatic Bilge Pump Kit (Includes Hull Fitting, Hose and Mounting plate)
1100 Gallon per hour Bilge Pump and Mounting Plate for Minijet Avenger box-stringers. Minijet Hull Fitting and 6 ft of bilge hose.
Sea-Doo Engine Mounts
Minijet Bilge Pump Bypass Fitting
Cleanly route your bilge pump line out of your boat with this 1 1/8in fitting, designed to be compatible with our bilge pump and bilge hose.
Long Reach Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Minijet Gen 2 Baffled Blower Vent
This Minijet designed Blower Vent is designed to resist ingress of water through the use of baffles. This is also available as part of our Blower Kit.
Bilge Hose (1-1/8in diameter, 6ft length)
This bilge hose is ideal for routing your bilge water out of your hull, and it is designed to work with our automatic bilge pump and hull bypass fittings.
Bilge hose has a 1-1/8in diameter and is sold in 6 foot lengths. Most boats use between 4ft and 6ft of hose. For custom length please contact us.