Minijet Trimmable Posi Nozzle
Ready to boost the performance and handling of your boat? The Minijet Posi Nozzle is the easiest way to improve your top speed, planing time, and turning performance!
- Using ball and socket nozzle technology, our nozzle focuses and re-directs the flow of water much more efficiently than all OEM nozzles which merely deflect a formed jet of water!
- Universally compatible and a direct bolt-on fit to most PWC pumps with our new family of pump and nozzle adapter plates.
- Compatible with our new nozzle Reverse Bucket and Over Centre linkage for Minijet Trimmable Posi Nozzle
If you have any questions about this product please Contact Us before placing your order.
NOTE: Available on backorder
We estimate this upcoming batch to ship Winter 2026 - timeline to be confirmed at the time of purchase.Â
Reverse Bucket and Over Centre Reverse Linkage Assembly for Minijet Trimmable Posi Nozzle
Ready to boost the performance and REVERSE handling of your boat? Our new reverse bucket with an integrated mount and reverse linkage is the perfect plug and play solution!
- Bolts directly to our new Minijet Trimmable Posi Nozzle
- Robust stainless steel mount, pivots, and control linkage
- Fabricated lightweight aluminum reverse bucket
- Includes stainless steel over centre reverse linkage, capable of locking the reverse bucket in the up position, and setting a travel stop in the down position.
- Sold as a complete, fully welded assembly. Bolt it on and go boating!
If you have any questions about this product please Contact Us before placing your order.
NOTE: PRE-ORDER ONLY
This product is available for pre-sale only at this time. All orders placed will be assigned a position in our production queue and will be shipped once the run is finished. We estimate batch 2 will ship winter 2025 with the timeline to be confirmed at the time of purchase.Â
Minijet 4 Position Billet Machined Horizontal Switch Panel
Our billet CNC milled aluminum switch panels and marine grade switches are the best way to organize your boat's electrical functions!
For more information about the switches included in the switch panel HERE
Switch Type
Minijet 4 Position Billet Machined Vertical Switch Panel
Our billet CNC milled aluminum switch panels and marine grade switches are the best way to organize your boat's electrical functions!
For more information about the switches included in the switch panel HERE
Switch Type
Minijet 6 Position Billet Machined Horizontal Switch Panel
Our billet CNC milled aluminum switch panels and marine grade switches are the best way to organize your boat's electrical functions!
For more information about the switches included in the switch panel HERE
Switch Type
Minijet 6 Position Billet Machined Vertical Switch Panel
Our billet CNC milled aluminum switch panels and marine grade switches are the best way to organize your boat's electrical functions!
For more information about the switches included in the switch panel HERE
Switch Type
Minijet Inc Yamaha Die Cast Intake Kit
Designed specifically for Yamaha applications, our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 Driveshaft support to suit your donor PWC equipment.
- QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
- QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
Click Here To View Installation Instructions*
* In our pursuit of ever-improving our products, the parts you receive may not match the instructions exactly. While we are working to keep our instructions up to date, please contact us with any questions you may have.
Options include:
- Fixed Intake Grate
- EZ Clean Intake Stomp Grate
- No drain holes in intake base plate (optional exclusion)
- High performance upgrade package with Fixed Intake Grate **
- High performance upgrade package with EZ Clean Intake Stomp Grate**
**Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing.
All of our intakes are also available with pre-welded, and pre-assembled driveshaft interfaces. If you are interested in these services please contact us before placing an order online. We will discuss options and details with you before you commit to a purchase.
Don't see your donor in the list of parts or options? Please contact us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary.
All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish.
Minijet Inc Sea-Doo Die Cast Intake Kit
Designed specifically for Sea-Doo applications (excl. SPARK), our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 Driveshaft support to suit your donor PWC equipment.
- QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
- QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
Click Here To View Installation Instructions*
* In our pursuit of ever-improving our products, the parts you receive may not match the instructions exactly. While we are working to keep our instructions up to date, please contact us with any questions you may have.
Options include:
- Fixed Intake Grate
- EZ Clean Intake Stomp Grate
- No drain holes in intake base plate (optional exclusion)
- High performance upgrade package with Fixed Intake Grate **
- High performance upgrade package with EZ Clean Intake Stomp Grate**
**Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing.
All of our intakes are also available with pre-welded, and pre-assembled driveshaft interfaces. If you are interested in these services please contact us before placing an order online. We will discuss options and details with you before you commit to a purchase.
Don't see your donor in the list of parts or options? Please contact us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary.
All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish.
Minijet Inc Spark Cast Intake Kit
Designed specifically for the Sea-Doo SPARK, our Minijet Cast Aluminum intake kits are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 EZ Clean Intake Stomp Grate w/ installation hardware
- QTY 1 Billet CNC machined pump adapter to suit 140mm Sea-Doo spark pump.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
Click Here To View Installation Instructions*
* In our pursuit of ever-improving our products, the parts you receive may not match the instructions exactly. While we are working to keep our instructions up to date, please contact us with any questions you may have.
Don't see the parts that you need? Please contact us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary.
Minijet Electronic Finger Control Levers for Sea-Doo
Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way.
Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions.
This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you.
Please note this product does not include the electronic throttle or iBR sensors.
Sea-Doo Fuel Pump Weld-In Ring
This Sea-Doo fuel pump mounting ring is CNC cut from billet 6061 series aluminum with internal and external interfaces that match OEM plastic fuel tanks.
Specifically cut with buttress threads that match the OEM fuel pump retainer ring, and an internal diameter that tightly holds the OEM fuel pump gasket, this design is better able to hold a fuel pump in position than other available products.
The wide flange along the bottom edge provides a good accessible weld joint. The flange is also a closer match to most fuel tank materials, making it easier to weld materials of similar thicknesses.
Please note: Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.
Minijet Gen 2 Baffled Blower Vent
This Minijet designed Blower Vent is designed to resist ingress of water through the use of baffles. This is also available as part of our Blower Kit.
Minijet Flip-Up Windscreen
These flip-up windscreens offer protection from wind, water, and bugs, while maintaining the low profile look of your boat.
Flip the windscreen up when you want more coverage, and tuck it away when you want to sneak under bridges or into tight spaces.
Designed with a universal mounting base that can reach around various windscreen profiles, and an adjustable handle and pivot clamp these windscreen fit a wide variety of boats.
Minijet A2-10 – Complete Hull Kit
The A2-10 is ultra-compact and lightweight - a true adventure boat, ideal for smaller engines - the purist's mini jet. Read more about the A2-10 under 'Specifications' below.
How To Build Your A2-10
- Select your Hull Kit options using the fields below
- Select a suitable crate engine or donor PWC
- Order your engine & hull-specific Rigging Kit
- Assemble your boat following our YouTube guide
- Accessorize your boat with a hull-specific Finishing Kit!
Select Your Kit Options
Minijet A2-11 – Complete Hull Kit
The A2-11 is our go to model; it's the ideal mix of handling and comfort, featuring high performance engine compatibility. Read more about the A2-11 under 'Specifications' below.
How To Build Your A2-11
- Select your Hull Kit options using the fields below
- Select a suitable crate engine or donor PWC
- Order your engine & hull-specific Rigging Kit
- Assemble your boat following our YouTube guide
- Accessorize your boat with a hull-specific Finishing Kit!
Select Your Kit Options
Minijet A2-12 – Complete Hull Kit
The A2-12 is a compact and capable family boat. With seating for 4 and extra storage space it is ready for action on the water. Read more about the A2-12 under 'Specifications' below.
How To Build Your A2-12
- Select your Hull Kit options using the fields below
- Select a suitable crate engine or donor PWC
- Order your engine & hull-specific Rigging Kit
- Assemble your boat following our YouTube guide
- Accessorize your boat with a hull-specific Finishing Kit!
Select Your Kit Options
Minijet A2-14 – Complete Hull Kit
The A2-14 is the largest and most versatile Minijet; with a spacious interior and seating for up to 5 people. Read more about the A2-14 under 'Specifications' below.
How To Build Your A2-14
- Select your Hull Kit options using the fields below
- Select a suitable crate engine or donor PWC
- Order your engine & hull-specific Rigging Kit
- Assemble your boat following our YouTube guide
- Accessorize your boat with a hull-specific Finishing Kit!
Select Your Kit Options
Minijet Inc Kawasaki Die Cast Intake Kit
Designed specifically for Kawasaki applications, our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 Driveshaft support to suit your donor PWC equipment.
- QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
- QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
Click Here To View Installation Instructions*
* In our pursuit of ever-improving our products, the parts you receive may not match the instructions exactly. While we are working to keep our instructions up to date, please contact us with any questions you may have.
Options include:
- Fixed Intake Grate
- EZ Clean Intake Stomp Grate
- No drain holes in intake base plate (optional exclusion)
- High performance upgrade package with Fixed Intake Grate **
- High performance upgrade package with EZ Clean Intake Stomp Grate**
**Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing.
All of our intakes are also available with pre-welded, and pre-assembled driveshaft interfaces. If you are interested in these services please contact us before placing an order online. We will discuss options and details with you before you commit to a purchase.
Don't see your donor in the list of parts or options? Please contact us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary.
All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish.
Minijet Inc Honda Die Cast Intake Kit
Designed specifically for Honda applications, our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 Driveshaft support to suit your donor PWC equipment.
- QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
- QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
Click Here To View Installation Instructions*
* In our pursuit of ever-improving our products, the parts you receive may not match the instructions exactly. While we are working to keep our instructions up to date, please contact us with any questions you may have.
Options include:
- Fixed Intake Grate
- EZ Clean Intake Stomp Grate
- No drain holes in intake base plate (optional exclusion)
- High performance upgrade package with Fixed Intake Grate **
- High performance upgrade package with EZ Clean Intake Stomp Grate**
**Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing.
All of our intakes are also available with pre-welded, and pre-assembled driveshaft interfaces for. If you are interested in these services please contact us before placing an order online. We will discuss options and details with you before you commit to a purchase.
Don't see your donor in the list of parts or options? Please contact us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary.
All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish.
