Sea-Doo Engine Mounts
CAD $ 350.00
Designed for mounting 4-tec Sea-doo Rotax engines. These engine mounts are designed to work with common stringer interfaces on all Minijet A2 series hulls. This motor mount assembly is available in two different configurations to suit hulls with or without 1/2″ thick UHMW.
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Blower Hose (3in diameter, 4ft length)
Blower hose is also available as part of our complete blower kit.
Custom lengths are available, please contact us.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
Traditional SSS Sand Trap
Traditional style jetboat sand trap. Some users prefer this sand trap because it is less prone to clogging, however it does allow some particulate matter into the cooling loop.
Our Minijet Sand Trap Kit uses a filter element that is easily removeable for cleaning, and removes more particulate matter.
