Sikaflex – 291 – Marine Sealant
CAD $ 20.00
Sikaflex 291 is a professional marine adhesive and sealant used by boat builders around the world. It can be used above and below the waterline, bonds well to metals, woods, and other marine products, and it forms an elastic / vibration resistant bond between components. This grey sealant is also a close color match with surrounding aluminum panels, and it can be sanded and painted to match surrounding areas if required.
We recommend Sikaflex 291 for sealing cable pass throughs, pump adapter plates, and joints between your intake base plate, intake housing, and transom.
Sikaflex 291 is not recommended for use with plastics that are prone to stress cracking (e.g. plexiglass, polycarbonate, etc.)
This product is sold as a 300ml (10.1 fl.oz) tube that is compatible with common caulking guns.
Additional information
| Weight | 0.6 kg |
|---|---|
| Dimensions | 30 × 5 × 5 cm |
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.
Livewell / Baitwell Pump
We recommend also purchasing a Wire Mesh Strainer to prevent clogging and an Aerator Spray Head to better oxygenate the water.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
