Minijet Bulkhead Fittings – routes water through bulkhead plates to another hose
CAD $ 29.00
Description
Our custom bulkhead fittings are CNC machined from 6061 T6 aluminum and black anodized for durable, long lasting sleek look.
These fittings can be used to route hoses through bulkhead plates such as a transom or engine bulkhead. Fittings are available in a number of sizes that suit common hose diameters (1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″).. Each fitting is supplied with a bulkhead nut to secure it to your hull.
Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 12 × 6 × 6 cm |
| Size (inches) | 1, 1/2, 1/4, 3/4, 3/8, 5/8 |
Related products
Minijet Cold Air Intake Kit
The Minijet Cold-Air intake with filter is a great way to make sure your engine is getting clean air. This kit is available in 3 inch or 4 inch tubing diameters to suit different engines.
This kit includes:
- Vibrant classic air filter with SS hose clamp
- Air filter mounting tube
- 3ft of Canaflex semi-rigid air hose
- QTY 2 stainless steel hose clamps
Automatic Bilge Pump Kit (Includes Hull Fitting, Hose and Mounting plate)
1100 Gallon per hour Bilge Pump and Mounting Plate for Minijet Avenger box-stringers. Minijet Hull Fitting and 6 ft of bilge hose.
Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
