Minijet Cargo Rack
The Minijet cargo rack is ideal for storing bulky gear or extra fuel in your boat!
Cargo Rack Length
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Heat Exchanger Replacement End Caps
Minijet Sand Trap – Replacement O-Rings
Minijet Strap Tabs
Re-use your OEM straps to retain load/vibration-sensitive engine components in your boat!
constructed from 5052 aluminum our strap tabs can easily be cut or bent to suit your specific needs!
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Waterbox Support Ring
Yamaha Angled Isolators
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Engine Shim (10 Pack)
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
HD Battery Retainer Strap Pair
Much stronger and slightly shorter than OEM straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
These straps can be added to the Minijet Battery Box incase your donor PWC does not have OEM straps to use.
(Battery Box sold separately).
Minijet Battery Box
Our in-house designed Battery Boxes fit all popular PWC battery sizes!
Battery Size (Max Footprint)
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
Minijet Bulkhead Fittings – routes water through bulkhead plates to another hose
Our custom bulkhead fittings are CNC machined from 6061 T6 aluminum and black anodized for durable, long lasting sleek look.
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Sea-Doo Coolant Reservoir Mount
The Minijet Sea-Doo coolant reservoir mount allows you to re-home your cooling bottle with no existing mounting features.
Coolant Reservoir Type
Select options
This product has multiple variants. The options may be chosen on the product page
Sea-Doo Supercharger Rebuild Kit
Minijet Foot Throttle
Durable solid-aluminum throttle pedal available with different throttle cable travel lengths.
This pedal is compatible with 3300 series push-pull control cables - suitable for large engine installation. For all PWC engine installations we recommend using our standard throttle cable kit and attaching it in place of a 3300 series cable.
Please note: We do not keep this item in our regular stock, and each foot throttle is custom made to order. We will confirm an approximate lead time for each foot throttle when an order is placed. By placing an order for a foot throttle you acknowledge that this product is a custom piece and cannot be canceled or refunded.Â
Select options
This product has multiple variants. The options may be chosen on the product page
Pack-Out Compatible Mounting Bracket – Full Width (1 inch height)
Pack-Out Compatible Mounting Brackets (1 inch height)
Pack-Out Compatible Mounting Brackets (3 inch height)
Yamaha Engine Mounts
Designed for mounting 1800cc Yamaha engines. These engine mounts are designed to work with common stringer interfaces on all Minijet A2 series hulls. This mount assembly replaces the OEM cast engine mounting brackets that are attached to the engine block, and they allow you to reuse the OEM straight rubber isolator mounts.
Please note, these motor mounts are provided as a tack-welded kit. They are pre-assembled in the correct orientation to work with most engines. You must confirm this orientation and complete the remaining welding work before installing these mounts.Â
Soundown
KLS Sand Trap
This traditional style jetboat sand trap from KLS is a great option for removing sand and debris from your cooling water supply. Some users prefer this sand trap because it allows un-filtered water to bypass the system when full, compared to other sand traps which will slow or stop water flow when full.
Our Minijet Sand Trap Kit uses a filter element that is easily removable for cleaning, and ensures no particulate matter gets through.
Select options
This product has multiple variants. The options may be chosen on the product page
Traditional SSS Sand Trap
Traditional style jetboat sand trap. Some users prefer this sand trap because it is less prone to clogging, however it does allow some particulate matter into the cooling loop.
Our Minijet Sand Trap Kit uses a filter element that is easily removeable for cleaning, and removes more particulate matter.
Sea-Doo Spark Gauge Cluster Mount Kit
Attwood / Seachoice 3-inch Engine Compartment Bilge Blower
Water Resistant Turbo In-line Bilge Blower (12v, 120 CFM) with ducting. We also sell this blower in a kit with a through-hull aluminum baffled vent and everything you need for installation.
Minijet Cable Tie Mounts
Select options
This product has multiple variants. The options may be chosen on the product page
Sea-Doo Engine Mounts
Designed for mounting 4-tec Sea-doo Rotax engines. These engine mounts are designed to work with common stringer interfaces on all Minijet A2 series hulls. This motor mount assembly is available in two different configurations to suit hulls with or without 1/2" thick UHMW.
Select options
This product has multiple variants. The options may be chosen on the product page
