Minijet 300+ HP Heat Exchanger
Minijet 60-270 HP Heat Exchanger
Minijet 3″ Exhaust Kit for ROTAX ACE 1503 (Sea-Doo) Engines
Minijet 3″ Exhaust Kit for ROTAX ACE 1630 (Sea-Doo) Engines
Minijet 3″ Exhaust Kit for ROTAX ACE 900 (Sea-Doo SPARK) Engines
Minijet 3″ Exhaust Kit for Yamaha 1.8L Engines
Sea-Doo Fuel Pump Weld-In Ring
This Sea-Doo fuel pump mounting ring is CNC cut from billet 6061 series aluminum with internal and external interfaces that match OEM plastic fuel tanks.
Specifically cut with buttress threads that match the OEM fuel pump retainer ring, and an internal diameter that tightly holds the OEM fuel pump gasket, this design is better able to hold a fuel pump in position than other available products.
The wide flange along the bottom edge provides a good accessible weld joint. The flange is also a closer match to most fuel tank materials, making it easier to weld materials of similar thicknesses.
Please note: Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.
Minijet Gen 2 Baffled Blower Vent
This Minijet designed Blower Vent is designed to resist ingress of water through the use of baffles. This is also available as part of our Blower Kit.
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Select options
This product has multiple variants. The options may be chosen on the product page
BRP Filler Neck Liner
OEM BRP Part 275500757 for Sea-Doo products
Also a recommended upgrade for the Minijet Billet Fuel Cap to suppress backsplash when refuelling!
Minijet Yamaha Air Intake Adaptor
Smoothly duct air from your 4 inch air filter or cold air intake to your throttle body or supercharger inlet.
Engine Model
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Bypass Fittings – routes water out of hull
Our custom bypass fittings are CNC machined from 6061 T6 aluminum and black anodized for durable, long lasting sleek look.
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Cold Air Intake Kit
The Minijet Cold-Air intake with filter is a great way to make sure your engine is getting clean air. This kit is available in 3 inch or 4 inch tubing diameters to suit different engines.
This kit includes:
- Vibrant classic air filter with SS hose clamp
- Air filter mounting tube
- 3ft of Canaflex semi-rigid air hose
- QTY 2 stainless steel hose clamps
Select options
This product has multiple variants. The options may be chosen on the product page
Custom-Cut & Bead-Rolled 3 inch OD Thin Wall Tube
Custom-Cut & Bead-Rolled 4 inch OD Thin Wall Tube
Heat Exchanger
This product is on backorder, with no planned fulfillment date from our supplier. Please see our other heat exchanger product offerings instead.
For engines with 60 HP to 270 HPÂ we recommend This Alternative Product
For engines with 300+ HP we recommend This Alternative Product
Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.
Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s)
Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)Fittings included are:
2x 3/4 inch NPT to 1 inch barb 2x 3/4 inch NPT to 3/4 inch barb
Cooling System Y-Fitting (for 3/4 inch diameter hose)
This coolant system Y-fitting is ideal for splitting coolant water flow between two heat exchangers in a jet boat. This Y-fitting more evenly splits the water flow compared to a standard T-fitting.
- Barbed connection suitable for hoses with 3/4 inch internal diameter.
- Plastic material is lightweight, will not corrode.
3-inch Engine Compartment Blower Kit
Automatic Bilge Pump Kit (Includes Hull Fitting, Hose and Mounting plate)
1100 Gallon per hour Bilge Pump and Mounting Plate for Minijet Avenger box-stringers. Minijet Hull Fitting and 6 ft of bilge hose.
Long Reach Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
Bilge Hose (1-1/8in diameter, 6ft length)
This bilge hose is ideal for routing your bilge water out of your hull, and it is designed to work with our automatic bilge pump and hull bypass fittings.
Bilge hose has a 1-1/8in diameter and is sold in 6 foot lengths. Most boats use between 4ft and 6ft of hose. For custom length please contact us.
Blower Hose (3in diameter, 4ft length)
Blower hose is also available as part of our complete blower kit.
Custom lengths are available, please contact us.
Engine Cover Strut Kit
