Bow Eye – Weld On
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.
This product is on backorder. Please see our other weld-on eyelet offerings instead.
For bow eyes we recommend This Alternative Product
For general tie downs we recommend This Alternative Product
Bow Eye (2 Hole) – Weld On
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.
This product is on backorder. Please see our other weld-on eyelet offerings instead.
For bow eyes we recommend This Alternative Product
For general tie downs we recommend This Alternative Product
Mustang Survival Horsepower Neoprene PFD
This is our go-to PFD/lifejacket when boating - lightweight and made from durable yet comfortable high-grade neoprene.
Select options
This product has multiple variants. The options may be chosen on the product page
Steering Wheel – Batwing / Butterfly
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
Windscreen Gasket Material
Windscreen gasket material ideal for windows on Minijet high-profile windscreen assemblies.
This rubber gasket material is designed to work with 1/8 inch thickness aluminum panels, and 1/4 inch thickness lexan or glass window inserts. This gasket material allows the lexan or glass insert to sit outside of the aluminum panel so that it can not be pushed inwards by water, waves, or impacts. Lexan or glass inserts must be cut larger than the mating hole in order to make this gasket work correctly. After installation, the outer lip of this gasket can be folded inward on itself, locking the window inserts into position.
- Minimum recommended distance between edge of glass and edge of body panel = 0.140 inch (glass piece should be 2 x 0.140 inch = 0.280 inch larger than the body panel opening).
- Minimum recommended radius of body panel opening = 2.00 inch
- Suitable for body panel thicknesses from 0.075 inch to 0.140 inch
- Suitable for glass panel thicknesses from 0.1875 inch to 0.250 inch
JBS Steering Helm
JBS Tilt Steering Helm
The JBS tilting steering helm offers an adjustable steering wheel position. This helm can tilt the steering wheel 42 degrees upwards, and 6 degrees downward for different drivers.
Our JBS tilt steering helm provides 135 degree of steering wheel angle between the steering travel stops. Our JBS tilt steering helm will require a steering wheel hub adapter (3 hole adapter for Batwing style steering wheel or 6 hole for a round wheel)
Dry Suit – Level 6 Emperor
Engine Cover Strut Kit
Engine Shim
Minijet Cargo Rack
The Minijet cargo rack is ideal for storing bulky gear or extra fuel in your boat!
Cargo Rack Length
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Universal Gauge Cluster Box
Easily re-home your OEM PWC gauge cluster with our handy gauge cluster box.
Reference the images provided to identify your gauge cluster with our internal cluster numbering system.
Please Note: Welding is required for final assembly of the housing and is recommended for final installation into the dash of your boat. Reference the notes below for box dimensions based on the cluster model
Gauge Cluster Type
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Heat Exchanger Replacement End Caps
Minijet Rotax Electronic Throttle Adaptor for Ultraflex B301 Lever
Our Rotax Throttle Adaptor for the Ultraflex B301 Lever is the simplest and cleanest way to run this beloved helm throttle lever with a newer Sea-Doo donor that uses an electronic throttle sensor.
Minijet Sand Trap – Replacement O-Rings
Minijet Strap Tabs
Re-use your OEM straps to retain load/vibration-sensitive engine components in your boat!
constructed from 5052 aluminum our strap tabs can easily be cut or bent to suit your specific needs!
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Universal Mounting Tabs
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Waterbox Support Ring
Yamaha Angled Isolators
Select options
This product has multiple variants. The options may be chosen on the product page
Yamaha Driveshaft Shortening Service
Yamaha driveshafts are often exceedingly long in mini jet boat applications. Leveraging their non-necked geometry we are able to shorten the shaft by cutting and re-splining it with specialty tools to precise tolerances - no sketchy shaft welding that would warp or compromise the strength of the driveshaft!
The shaft shortening procedure can be done in 2 ways:
Option 1
Send us your complete & still assembled driveshaft, pump, and stator assembly and specify the thickness of your transom panel (for non-Minijet hulls). We will measure and machine your shaft to match our Yamaha intake housing before shipping your shortened shaft and pump assembly back to you. * Note that in order to select Option 1 you must be using a recently-purchased pre-fabricated & machined Minijet Yamaha intake (the D-plate should be pre-welded on to the intake and the face machined from factory). For older intake kits where the D-plate was not welded onto your intake from factory, or if another brand of intake was used, Option 2 below must be used.Option 2
Record the amount of length you wish to be removed from your shaft and ship it to us. We will machine your shaft to the dimension you specify and ship it back to you.Please select your preference:
Yamaha Wiring Harness Extension
Simply extend the cockpit controls of your Yamaha powered mini boat with our wiring harness extension!
INSTRUCTIONS
- Use the FIRST selection field to REMOVE any 'default' connectors that are not applicable to you
- Use the SECOND selection field to ADD any alternate or extra connector extensions
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Engine Shim (10 Pack)
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
Grab Rail – Stainless Steel
Select options
This product has multiple variants. The options may be chosen on the product page
HD Battery Retainer Strap Pair
Much stronger and slightly shorter than OEM straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
These straps can be added to the Minijet Battery Box incase your donor PWC does not have OEM straps to use.
(Battery Box sold separately).
Livewell / Baitwell Kit – (Pump, Aerator, Hose, Filter, Drain-plug)
This kit includes a Wire Mesh Strainer to prevent clogging and an Aerator Spray Head to better oxygenate the water and 4 ft of hose.
Livewell / Baitwell Pump
We recommend also purchasing a Wire Mesh Strainer to prevent clogging and an Aerator Spray Head to better oxygenate the water.
Minijet Battery Box
Select options
This product has multiple variants. The options may be chosen on the product page
