Minijet Bypass Fittings – routes water out of hull
Our custom bypass fittings are CNC machined from 6061 T6 aluminum and black anodized for durable, long lasting sleek look.
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Cold Air Intake Kit
The Minijet Cold-Air intake with filter is a great way to make sure your engine is getting clean air. This kit is available in 3 inch or 4 inch tubing diameters to suit different engines.
This kit includes:
- Vibrant classic air filter with SS hose clamp
- Air filter mounting tube
- 3ft of Canaflex semi-rigid air hose
- QTY 2 stainless steel hose clamps
Select options
This product has multiple variants. The options may be chosen on the product page
Steering Cable
Steering cables for use in various hulls.
- Cables are available in different lengths with 1ft length increments.
- Cables lengths are measured from the tip of each threaded end.
- Cables use a 5/16"-24UNF thread, suitable for use with our threaded steering cable ends and steering cable extension kits.
Select options
This product has multiple variants. The options may be chosen on the product page
Dry Suit – Level 6 Cronos
Custom-Cut & Bead-Rolled 3 inch OD Thin Wall Tube
Universal Cable Finger Throttle Lever for M8 Barrel Adjustor
This product is currently back-ordered. We recommend purchasing Cable Finger Throttle Control Lever for M8 Barrel Adjustor - Can be made to fit our Large Steering Wheel with minor modifications to the wheel.
This universal cable finger throttle lever is designed to fit a wide variety of; applications, handlebars, and engines.
With 35mm of available cable travel, this throttle lever will out-pull and out-perform all other options in the market. The adjustable mounting point and mounting clamps allow users to adjust the position and angle of the lever on the steering wheel. Mounting clamps are available to fit standard 7/8" handlebars, or larger round style steering wheels.
Please choose from one of the mounting clamp options listed below.
Select options
This product has multiple variants. The options may be chosen on the product page
Custom-Cut & Bead-Rolled 4 inch OD Thin Wall Tube
UHMW Fastener Kit
These bolts kits allow you to securely fasten a sheet of UHMW plastic to the bottom of your hull for extra protection. Each kit contains various lengths of 5/16"-18UNC stainless steel flathead socket cap screws, matching sealing washers, and nylon locking nuts. Together these bolts, washers, and nuts ensure a strong and leak free connection.
Kits are available in a small pack for repairs or small installations. We also offer kits that are tailored to fit out 10ft, 11ft, and 12ft A2 Series hulls. Quantities for each kit size are described below.
Select options
This product has multiple variants. The options may be chosen on the product page
Wireless Communicator – Sena Tufftalk M (Dual Pack)
Cup Holder – Stainless Steel with Drain
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Boating Safety Kit
The ultimate kit for safe mini jet boating, Safety kit includes compact items for all your rescue and first aid needs.Â
Safety Kit Includes:
- First aid kit
- Fox 40 micro pealess safety whistle (110 decibels)
- 50' (15 m) woven polypropylene Fox 40 marine rope
- LED light
- Bilge sponge
- Waterproof screw-top container/bailer
- 2 x glow sticks
- Compass
- Dry bag (all components of the kit fit into the dry bag)
Heat Exchanger
This product is on backorder, with no planned fulfillment date from our supplier. Please see our other heat exchanger product offerings instead.
For engines with 60 HP to 270 HPÂ we recommend This Alternative Product
For engines with 300+ HP we recommend This Alternative Product
Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.
Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s)
Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)Fittings included are:
2x 3/4 inch NPT to 1 inch barb 2x 3/4 inch NPT to 3/4 inch barb
Cooling System Y-Fitting (for 3/4 inch diameter hose)
This coolant system Y-fitting is ideal for splitting coolant water flow between two heat exchangers in a jet boat. This Y-fitting more evenly splits the water flow compared to a standard T-fitting.
- Barbed connection suitable for hoses with 3/4 inch internal diameter.
- Plastic material is lightweight, will not corrode.
Minijet Kick Plate Kit
A staple in our turn-key boats and now available as a drop-in part for DIY boats, our kick plate kit offers the driver and front seat passenger a comfortable foot rest and secure way to brace themselves in your boat.
- 38in kick plate is recommended for our A2-10 and A2-11 models or similar 2 seat layout boats
- 48in kick plate is recommended for our A2-12 and A2-14 models, or similar sized 4/5-seat layout boats.
Select options
This product has multiple variants. The options may be chosen on the product page
Steering Wheel – 13″ Round
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet 3/16 Wall Pump Guard Tubes
Wether your boat kit didn't include pump guard tubes out of the box, or yours have sacrificed themselves to save your pump, we're happy to offer a fresh set - either with square ends ready to cope to your hull, or pre-tapered to match the transom angle of your Minijet A2-series boat.
Please Select Your Application
Select options
This product has multiple variants. The options may be chosen on the product page
Minijet Steering Wheel Hub
Select options
This product has multiple variants. The options may be chosen on the product page
3-inch Engine Compartment Blower Kit
Automatic Bilge Pump Kit (Includes Hull Fitting, Hose and Mounting plate)
1100 Gallon per hour Bilge Pump and Mounting Plate for Minijet Avenger box-stringers. Minijet Hull Fitting and 6 ft of bilge hose.
Long Reach Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Aerator Spray Head
An Aerator Spray Head to better oxygenate the water in a Bait/live-well.
Aluminum Weld-on Hinge
Select options
This product has multiple variants. The options may be chosen on the product page
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
Bilge Hose (1-1/8in diameter, 6ft length)
This bilge hose is ideal for routing your bilge water out of your hull, and it is designed to work with our automatic bilge pump and hull bypass fittings.
Bilge hose has a 1-1/8in diameter and is sold in 6 foot lengths. Most boats use between 4ft and 6ft of hose. For custom length please contact us.
Blower Hose (3in diameter, 4ft length)
Blower hose is also available as part of our complete blower kit.
Custom lengths are available, please contact us.
