Hot
JBS Steering – System Builder
CAD $ 616.00
This tool helps you select the different options to build a complete JBS steering kit from your steering wheel, all the way to your jet nozzle.
Steering Wheel
Pick from a variety of steering wheel styles and colors
Helm
Two JBS steering helm options to choose from, tilting or non-tilting.
Steering Hub Adapter
You can purchase 3 hole hub for Batwing Wheel or the 6 hole bolt pattern – 6x70mm for the Round Wheel.
Steering Cable
Choose a steering length cable that is suitable for your boat. This length is often 2ft longer than your overall hull length (i.e. an 11ft boat uses a 13ft long steering cable).
Steering Cable End
Add a threaded steering cable end to connect this cable to a steering nozzle. Thread size: 5/16″ – 24 UNF female thread.
Steering Cable Extension
A threaded steering cable extension may be required to bridge the distance between the steering cable and jet nozzle. This add-on kit includes a 5/16″ – 24 UNF – 4 inch length piece of threaded rod with a coupling nut and 2 jam nuts.
Cable Seal
Cable Seals can prevent water ingress of the sheathing of the cables. Water inside the cables can possibly cause early failure or possible seizures in freezing temperatures.
Related products
Minijet Electronic Finger Control Levers for Sea-Doo
Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way.
Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions.
This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you.
Please note this product does not include the electronic throttle or iBR sensors.
Universal Cable Finger Throttle Lever for M8 Barrel Adjustor
This universal cable finger throttle lever is designed to fit a wide variety of; applications, handlebars, and engines.
With 35mm of available cable travel, this throttle lever will out-pull and out-perform all other options in the market. The adjustable mounting point and mounting clamps allow users to adjust the position and angle of the lever on the steering wheel. Mounting clamps are available to fit standard 7/8" handlebars, or larger round style steering wheels.
Please choose from one of the mounting clamp options listed below.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
