Minijet Trim & Reverse Control Levers
Minijet Trimmable Posi Nozzle
Ready to boost the performance and handling of your boat? The Minijet Posi Nozzle is the easiest way to improve your top speed, planing time, and turning performance!
- Using ball and socket nozzle technology, our nozzle focuses and re-directs the flow of water much more efficiently than all OEM nozzles which merely deflect a formed jet of water!
- Universally compatible and a direct bolt-on fit to most PWC pumps with our new family of pump and nozzle adapter plates.
- Compatible with our new nozzle Reverse Bucket and Over Centre linkage for Minijet Trimmable Posi Nozzle
Reverse Bucket and Over Centre Reverse Linkage Assembly for Minijet Trimmable Posi Nozzle
Ready to boost the performance and REVERSE handling of your boat? Our new reverse bucket with an integrated mount and reverse linkage is the perfect plug and play solution!
- Bolts directly to our new Minijet Trimmable Posi Nozzle
- Robust stainless steel mount, pivots, and control linkage
- Fabricated lightweight aluminum reverse bucket
- Includes stainless steel over centre reverse linkage, capable of locking the reverse bucket in the up position, and setting a travel stop in the down position.
- Sold as a complete, fully welded assembly. Bolt it on and go boating!
Minijet 3″ Exhaust Kit for ROTAX ACE 1630 (Sea-Doo) Engines
Minijet 3″ Exhaust Kit for Yamaha 1.8L Engines
Minijet 4 Position Billet Machined Horizontal Switch Panel
Minijet 4 Position Billet Machined Vertical Switch Panel
Minijet 6 Position Billet Machined Horizontal Switch Panel
Minijet 6 Position Billet Machined Vertical Switch Panel
Minijet Inc Yamaha Die Cast Intake Kit
Designed specifically for Yamaha applications, our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 Driveshaft support to suit your donor PWC equipment.
- QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
- QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
- Installation & setup instructions (printed or digital).
- Fixed Intake Grate
- EZ Clean Intake Stomp Grate
- No drain holes in intake base plate (optional exclusion)
- High performance upgrade package with Fixed Intake Grate **
- High performance upgrade package with EZ Clean Intake Stomp Grate**
Minijet Inc Sea-Doo Die Cast Intake Kit
Designed specifically for Sea-Doo applications (excl. SPARK), our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 Driveshaft support to suit your donor PWC equipment.
- QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
- QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
- Installation & setup instructions (printed or digital).
- Fixed Intake Grate
- EZ Clean Intake Stomp Grate
- No drain holes in intake base plate (optional exclusion)
- High performance upgrade package with Fixed Intake Grate **
- High performance upgrade package with EZ Clean Intake Stomp Grate**
Minijet Inc Spark Cast Intake Kit
Designed specifically for the Sea-Doo SPARK, our Minijet Cast Aluminum intake kits are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 EZ Clean Intake Stomp Grate w/ installation hardware
- QTY 1 Billet CNC machined pump adapter to suit 140mm Sea-Doo spark pump.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
- Installation & setup instructions (printed or digital).
Minijet Electronic Finger Control Levers for Sea-Doo
Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way.
Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions.
This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you.
Please note this product does not include the electronic throttle or iBR sensors.
Minijet Sea-Doo Oblong Control Switch Housings
Minijet Sea-Doo Diamond Control Switch Housings
Minijet Sea-Doo Control Switch Panel
Sea-Doo Fuel Pump Weld-In Ring
This Sea-Doo fuel pump mounting ring is CNC cut from billet 6061 series aluminum with internal and external interfaces that match OEM plastic fuel tanks.
Specifically cut with buttress threads that match the OEM fuel pump retainer ring, and an internal diameter that tightly holds the OEM fuel pump gasket, this design is better able to hold a fuel pump in position than other available products.
The wide flange along the bottom edge provides a good accessible weld joint. The flange is also a closer match to most fuel tank materials, making it easier to weld materials of similar thicknesses.
Please note: Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.
Pop-Up Cleat – 4.5in
Pop-Up Cleat – 6in
Throttle cable kit
Most PWC throttle cables are less than 5 ft long and need to be extended to work in a boat. You can use this kit to fabricate your own cables and cable housings with custom lengths to suit your boat. This kit includes a variety of parts necessary to fit different donors, throttle bodies, throttle levers, etc.
Minijet Gen 2 Baffled Blower Vent
This Minijet designed Blower Vent is designed to resist ingress of water through the use of baffles. This is also available as part of our Blower Kit.
Minijet Flip-Up Windscreen
These flip-up windscreens offer protection from wind, water, and bugs, while maintaining the low profile look of your boat.
Flip the windscreen up when you want more coverage, and tuck it away when you want to sneak under bridges or into tight spaces.
Designed with a universal mounting base that can reach around various windscreen profiles, and an adjustable handle and pivot clamp these windscreen fit a wide variety of boats.
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Minijet Strap-On Boat Cover – Fits A2-11 & CUB
BRP Filler Neck Liner
OEM BRP Part 275500757 for Sea-Doo products
Also a recommended upgrade for the Minijet Billet Fuel Cap to suppress backsplash when refuelling!
Minijet A2-6 – Complete Hull Kit
Minijet Is On Fire T-Shirt
Designed to commemorate & fundraise for the residential fire on our property, this tongue-in-cheek shirt is a great way to remember those crazy times!
All proceeds of shirt sales go towards helping the family who lost their home and supporting the local businesses that supported us in our time of need.
Once we sell out we will not re-stock these shirts so get em while they're still HOT!
Select Your Size
Minijet A2-10 – Complete Hull Kit
The A2-10 is ultra-compact and lightweight - a true adventure boat, ideal for smaller engines - the purist's mini jet.
View Hull Kit Contents
Select Your Kit Options
Minijet A2-11 – Complete Hull Kit
The A2-11 is our go to model; it's the ideal mix of handling and comfort, featuring high performance engine compatibility.
View Hull Kit Contents
Select Your Kit Options
Minijet A2-12 – Complete Hull Kit
The A2-12 is a compact and capable family boat. With seating for 4 and extra storage space it is ready for action on the water.
View Hull Kit Contents
Select Your Kit Options
Minijet A2-14 – Complete Hull Kit
The A2-14 is the largest and most versatile Minijet; with a spacious interior and seating for up to 5 people.
View Hull Kit Contents
