Long Reach Stainless Steel Hinge and Hardware for Engine Cover
CAD $ 50.00
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Minijet Cold Air Intake Kit
The Minijet Cold-Air intake with filter is a great way to make sure your engine is getting clean air. This kit is available in 3 inch or 4 inch tubing diameters to suit different engines.
This kit includes:
- Vibrant classic air filter with SS hose clamp
- Air filter mounting tube
- 3ft of Canaflex semi-rigid air hose
- QTY 2 stainless steel hose clamps
Heat Exchanger
This product is on backorder, with no planned fulfillment date from our supplier. Please see our other heat exchanger product offerings instead.
For engines with 60 HP to 270 HPÂ we recommend This Alternative Product
For engines with 300+ HP we recommend This Alternative Product
Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.
Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s)
Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)
Fittings included are:
2x 3/4 inch NPT to 1 inch barb
2x 3/4 inch NPT to 3/4 inch barb
Bilge Hose (1-1/8in diameter, 6ft length)
This bilge hose is ideal for routing your bilge water out of your hull, and it is designed to work with our automatic bilge pump and hull bypass fittings.
Bilge hose has a 1-1/8in diameter and is sold in 6 foot lengths. Most boats use between 4ft and 6ft of hose. For custom length please contact us.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
HD Battery Retainer Strap Pair
Much stronger and slightly shorter than OEM straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
These straps can be added to the Minijet Battery Box incase your donor PWC does not have OEM straps to use.
(Battery Box sold separately).
