Rectangular Deck Hatch (11″ x 15″)
CAD $ 95.00
This rectangular hatch is the perfect way to add an access point to the deck of your boat.
- Locking handle provides secure closure
- Sealed top edge prevents water ingress
- Needs 11.00 inch x 15.00 inch of open deck space
- Open hatch provides 7.25 inch x 11.375 inch clear opening
Related products
Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.
Bilge Hose (1-1/8in diameter, 6ft length)
This bilge hose is ideal for routing your bilge water out of your hull, and it is designed to work with our automatic bilge pump and hull bypass fittings.
Bilge hose has a 1-1/8in diameter and is sold in 6 foot lengths. Most boats use between 4ft and 6ft of hose. For custom length please contact us.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
Attwood / Seachoice 3-inch Engine Compartment Bilge Blower
Water Resistant Turbo In-line Bilge Blower (12v, 120 CFM) with ducting. We also sell this blower in a kit with a through-hull aluminum baffled vent and everything you need for installation.
Wiper Blade
Wipers are available in a Minijet Wiper Kit with electronic actuator.
