Windscreen Gasket Material
CAD $ 7.50
Windscreen gasket material ideal for windows on Minijet high-profile windscreen assemblies.
This rubber gasket material is designed to work with 1/8 inch thickness aluminum panels, and 1/4 inch thickness lexan or glass window inserts. This gasket material allows the lexan or glass insert to sit outside of the aluminum panel so that it can not be pushed inwards by water, waves, or impacts. Lexan or glass inserts must be cut larger than the mating hole in order to make this gasket work correctly. After installation, the outer lip of this gasket can be folded inward on itself, locking the window inserts into position.
- Minimum recommended distance between edge of glass and edge of body panel = 0.140 inch (glass piece should be 2 x 0.140 inch = 0.280 inch larger than the body panel opening).
- Minimum recommended radius of body panel opening = 2.00 inch
- Suitable for body panel thicknesses from 0.075 inch to 0.140 inch
- Suitable for glass panel thicknesses from 0.1875 inch to 0.250 inch
We stock this gasket material as a continuous role and sell it in 1 foot increments. Please use the quantity selector to indicate the length you require in feet.
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Aerator Spray Head
An Aerator Spray Head to better oxygenate the water in a Bait/live-well.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
Attwood / Seachoice 3-inch Engine Compartment Bilge Blower
Water Resistant Turbo In-line Bilge Blower (12v, 120 CFM) with ducting. We also sell this blower in a kit with a through-hull aluminum baffled vent and everything you need for installation.
