Sea-Doo Engine Mounts
CAD $ 350.00
Designed for mounting 4-tec Sea-doo Rotax engines. These engine mounts are designed to work with common stringer interfaces on all Minijet A2 series hulls. This motor mount assembly is available in two different configurations to suit hulls with or without 1/2″ thick UHMW.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Stack Height | High Stack Height for use Without UHMW, Low Stack Height for use With UHMW |
Related products
Heat Exchanger
This product is on backorder, with no planned fulfillment date from our supplier. Please see our other heat exchanger product offerings instead.
For engines with 60 HP to 270 HPÂ we recommend This Alternative Product
For engines with 300+ HP we recommend This Alternative Product
Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.
Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s)
Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)
Fittings included are:
2x 3/4 inch NPT to 1 inch barb
2x 3/4 inch NPT to 3/4 inch barb
Stainless Steel Hinge and Hardware for Engine Cover
We Recommend always buying in pairs.
Each unit will come with:
1x stainless steel hinge with hinge-pin and locking ring
1x aluminum cnc-cut back plate
4x stainless steel screws- 10-24, 1.75 inch
4x stainless steel screws- 10-24, 0.75 inch
8x stainless steel nylon locking nuts
We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.
Pack-Out Compatible Mounting Bracket – Full Width (1 inch height)
3-inch Engine Compartment Blower Kit
HD Battery Retainer Strap Pair
Much stronger and slightly shorter than OEM straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
These straps can be added to the Minijet Battery Box incase your donor PWC does not have OEM straps to use.
(Battery Box sold separately).
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
