Minijet Steer Hub 3 Bolt Black #2
Minijet Steer Hub 3 Bolt Black #4
Minijet Steer Hub 3 Bolt Black #1
Minijet Steer Hub 6 Bolt Black #1
Minijet Steer Hub 6 Bolt Black #2
Minijet Steer Hub 6 Bolt Black #3
Click to enlarge
Minijet Steer Hub 3 Bolt Black #2
Minijet Steer Hub 3 Bolt Black #4
Minijet Steer Hub 3 Bolt Black #1
Minijet Steer Hub 6 Bolt Black #1
Minijet Steer Hub 6 Bolt Black #2
Minijet Steer Hub 6 Bolt Black #3
20210507 110346 w
Traditional SSS Sand Trap CAD $ 425.00
Back to products
a pair Capture
Minijet Suspension Seats - GTSE High Back (Pair of Seats) CAD $ 1,540.00

Minijet Steering Wheel Hub

CAD $ 79.00

Use these hub adaptors to run our large wheel or batwing wheel on a JBS helm.

 

Hole Pattern

CAD $ 79.00
For use with batwing wheel
CAD $ 79.00
For use with large (round) wheel
Clear
Add to wishlist
SKU: N/A Category:
Description

Description

Required to run our steering wheels on the JBS helm, this hub adaptor allows you to convert the proprietary steering shaft into a standard 3 or 6 bolt pattern.

The 3 hole hub was designed for our Batwing Wheel and the 6 hole bolt pattern – 6x70mm for the Round Wheel. These Steering Hubs are only required when using a JBS Helm.

Package Contains:

QTY 1 – Steering wheel hub adaptor of your choosing

Please Note: 

Mounting hardware is not included.

Additional information

Additional information

Weight 0.5 kg
Dimensions 10 × 10 × 10 cm
Hole Pattern

3 Hole, 6 Hole

You may also like…

Minijet Products No watermark 576
Minijet Products No watermark 580

Minijet Steering – System Builder

CAD $ 616.00
This tool helps you select the different options to build a complete steering kit from wheel to rudder (or nozzle, but rudder rhymes better).
Add to wishlist
Select options

    Related products

    Hot
    Minijet Electronic Finger Control Levers 1
    Minijet Electronic Finger Control Levers 2

    Minijet Electronic Finger Control Levers for Sea-Doo

    CAD $ 295.00
    Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way. Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions. This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you. Please note this product does not include the electronic throttle or iBR sensors.
    Add to wishlist
    Select options
    cable finger throttle lever
    Universal Mount Cable Lever 1.0

    Universal Cable Finger Throttle Lever for M8 Barrel Adjustor

    CAD $ 90.00
    This universal cable finger throttle lever is designed to fit a wide variety of; applications, handlebars, and engines. With 35mm of available cable travel, this throttle lever will out-pull and out-perform all other options in the market. The adjustable mounting point and mounting clamps allow users to adjust the position and angle of the lever on the steering wheel. Mounting clamps are available to fit standard 7/8" handlebars, or larger round style steering wheels. Please choose from one of the mounting clamp options listed below.
    Add to wishlist
    Select options
    Minijet Steering Helm Rev C watermarked
    Minijet Steering Helm Rev C watermarked

    Minijet Steering Helm

    CAD $ 250.00
    The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning. The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions. The Minijet steering helm Includes:
    • Minijet steering column with integrated steering wheel adapter, and cable pass-through
    • Stainless steel steering bearings and steering bearing mount plates to attach to dash area
    • Steering cable mounting plate
    • Steering cable actuator arm with integrated steering stops
    • Steering cable connection hardware
    • Helm installation hardware
    We also offer this as part of a complete Minijet Steering Kit.
    Add to wishlist
    Add to cart
    Minijet Products No watermark 564 small
    Minijet Products No watermark 564 small

    JBS Tilt Steering Helm

    CAD $ 529.00
    The JBS tilting steering helm offers an adjustable steering wheel position. This helm can tilt the steering wheel 42 degrees upwards, and 6 degrees downward for different drivers. Our JBS tilt steering helm provides 135 degree of steering wheel angle between the steering travel stops. Our JBS tilt steering helm will require a steering wheel hub adapter (3 hole adapter for Batwing style steering wheel or 6 hole for a round wheel)
    Add to wishlist
    Add to cart
    w 20211115 090614
    w20211115 090510

    Minijet Yamaha RiDE Relocate Kit

    CAD $ 690.00
    Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat. Minijet Yamaha RiDE Relocate Kit Includes:
    • motor and cable mounting plate
    • QTY 2 6-foot trim and reverse cables
    • QTY 2 trim and reverse cable ends
    • QTY 2 trim and reverse cable extension kits
    • QTY 2 4300 Series Cable Mounting Clamps
    • QTY 2 4300 Series Cable Mounting Spacers
    This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC. This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
    Add to wishlist
    Add to cart
    -20%
    DOMETIC SEASTAR CCX433 EXTREME CONTROL CABLES 86736

    CCX43314 SeaStar Solutions TFX 4300 Series Control Cable Assembly

    CAD Original price was: $ 167.00.Current price is: $ 133.00.
    4300CC/43CC universal type cables for heavy duty applications with clamp ends at the control and the drive. Splined core allows
    Add to wishlist
    Add to cart
    Yamaha Finger Throttle Round Wheel
    Yamaha Finger Throttle Exploded

    Yamaha Finger Throttle Adapter Kit

    CAD $ 240.00
    Re-locate your bulky OEM electronic Yamaha finger levers!
    Add to wishlist
    Select options
    DSC01214
    trim cable extension

    Trim / Reverse Cable Extension

    CAD $ 20.00
    Extend the reach of your trim or reverse cables with this extension kit.
    Add to wishlist
    Add to cart