Additional information
| Weight | 8 kg |
|---|---|
| Dimensions | 80 × 50 × 25 cm |
Minijet Steering – System Builder
CAD $616.00
This tool helps you select the different options to build a complete steering kit from wheel to rudder (or nozzle, but rudder rhymes better).
Steering Wheel
Pick from a variety of steering wheel styles and colors
Helm Kit
The Minijet helm is made in house and is a short steering ratio with 90 degrees of rotation allowing for quick and agile maneuvering.
Steering Cable
Choose a steering length cable that is suitable for your boat. This length is often 2ft longer than your overall hull length (i.e. an 11ft boat uses a 13ft long steering cable).
Steering Cable End
Add a threaded steering cable end to connect this cable to a steering nozzle. Thread size: 5/16″ – 24 UNF female thread.
Steering Cable Extension
A threaded steering cable extension may be required to bridge the distance between the steering cable and jet nozzle. This add-on kit includes a 5/16″ – 24 UNF – 4 inch length piece of threaded rod with a coupling nut and 2 jam nuts.
Cable Seal
Cable Seals can prevent water ingress of the sheathing of the cables. Water inside the cables can possibly cause early failure or possible seizures in freezing temperatures.
Additional information
Related products
Steering Cable
Steering cables for use in various hulls.
- Cables are available in different lengths with 1ft length increments.
- Cables lengths are measured from the tip of each threaded end.
- Cables use a 5/16"-24UNF thread, suitable for use with our threaded steering cable ends and steering cable extension kits.
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
