ADD ANYTHING HERE OR JUST REMOVE IT…
  • NEWSLETTER
  • CONTACT US
  • FAQs
Minijet Inc. Minijet Inc.
Select category
  • Select category
  • Apparel
  • Boats
  • Communication
  • Controls
  • Electrical
  • Engine
  • Flooring
  • Hardware
  • New
  • Promotional products
  • Pump
    • Impellers & Wear Rings
  • Seats
  • UHMW
Login / Register
0 Wishlist
0 items / CAD $0.00
Menu
Minijet Inc. Minijet Inc.
0 items / CAD $0.00
Browse Categories
  • Boats
  • Controls
  • Hardware
  • Communication
  • Electrical
  • Engine
  • Promotional products
  • Pump
  • Home
  • Shop
  • Our Jetboats
    • NEW 2023 Turn Key Models
    • Current 2022 Turn Key Models
    • DIY Kit Models
    • Our Partners
    • Discontinued Models
  • Video Gallery
  • FAQ
  • About us
  • Contact us
HotNew
12ft 1.3 Hull Only Exploded View
12ft The whole pacakge
12ft 5.1 Centre Reinforcing Stringers Kit
12ft Standard Stringers
12ft 9.1 Bottom UHMW Option
12ft 1.5 Complete Boat Low Windscreen with Lexan Inserts
12ft 1.4 Complete Boat Low Windscreen
12ft 1.3 Hull Only Exploded View
12ft 1.2 Hull Only
12ft 1.1 Complete Boat High Windscreen
12ft 1.0 Complete Boat Low Windscreen
12ft 7.2 Rear Seats Engine Cover Kit
12ft 3.4 Low Windscreen w Lexan
12ft 7.1 Rear Seats Engine Cover Kit
12ft 6.1 Rear Engine Cover Kit
wm 10ft 1.1 Complete Boat High Windscreen
wm 10ft 1.0 Complete Boat Low Windscreen
Click to enlarge
Home Shop New Minijet A2 Series – Kit Builder
02 Anchor Light Socket
Minijet Anchor Light CAD $90.00
Back to products
20220208 074907 edited
Cooling System Y-Fitting (for 3/4 inch diameter hose) CAD $20.00

Minijet A2 Series – Kit Builder

Our kit builder tool allows you to configure different options and accessories for our 10ft, 11ft, or 12ft A2 Series kits and welded hulls.

This kit builder tool works on a logic system similar to a ladder, each selection you make or product that you click will take you to the next rung of the ladder. If you move backwards or change a previous selection you will step back down the ladder and may need to re-enter certain selections due to the changes you have made.

Once you’ve assembled a kit of products that you are happy with you can proceed to checkout to pay a deposit for your order, or you can add it to a quote. With both of these options your order is submitted to us for review and we will contact you to discuss the details of your order, forecast lead times, shipping options, and to discuss any questions that you might have.

Please tell us about your donor PWC - what model year is your donor PWC from?
Please tell us about your donor PWC - Which manufacturer is your donor PWC from?
Sea-doo
Yamaha
Other
Which model of Seadoo engine are you using?
Spark
130 HP
155 HP
170 HP
215 HP
230 HP
255 HP
260 HP
300 HP
Which model of Yamaha engine are you using?
EX TR1
VX TR1
V1 TR1
MR1 4-stroke 1100
1800cc HO
1800cc SHO
1800cc SVHO
701 2-Stroke
760 2-Stroke
800 2-Stroke
1100 2-Stroke
1200 2-Stroke non power-valve
1200 2-Stroke with power-valve
1300 2-Stroke with power-valve
Which model of engine are you using?
Polaris - 2 and 4 stroke
Honda 1200cc
Honda 1500cc
Kawasaki 750/900/1100cc (excluding 1200cc) - 2 stroke
Kawasaki STX 15F
Kawasaki Ultra 15F/250X/260X
Kawasaki Ultra 300/310X
Other
Please specify your type and model of donor PWC.
Please choose a Hull Length. Our 10ft & 11ft hulls comfortably fit two people, while our 12ft hull can be configured to seat two of four people.
A2-10, 10ft Length (+CAD $4,985.00)
A2-11, 11ft Length (+CAD $5,985.00)
A2-12, 12ft Length (+CAD $6,985.00)
Our 10ft & 11ft hulls are available with two different windshield options, choose the look that suits you.
Low Windscreen (+CAD $0.00)
High Windscreen with Lexan Windows (+CAD $850.00)
Our 12ft hulls are available with three different windshield options, choose the look that suits you.
Low Windscreen (+CAD $0.00)
Low Windscreen with Lexan Windows (+CAD $995.00)
High Windscreen with Lexan Windows and Walk-through Door (+CAD $1,250.00)
Our 12ft hulls are available with our standard flat front deck, or a dropped bow area for added storage space.
Standard Bow (+CAD $0.00)
Dropped Bow (+CAD $900.00)
All of our hulls are equipped with a 1/4 in thick bottom panel as a standard feature. For additional keel strength we also offer an optional 3/8 in thick reinforced keel section.
1/4 in Standard Thickness (+CAD $0.00)
3/8 in Reinforced Thickness (+CAD $650.00)
All of our hulls are equipped with four boxed stringers as a standard feature. For additional keel strength you can add our centre reinforcing stringer kit.
Standard Stringers (+CAD $0.00)
Additional Center Reinforcing Stringers (+CAD $265.00)
All of our hulls are equipped with four boxed stringers as a standard feature. For additional keel strength you can add our centre reinforcing stringer kit.
Standard Stringers (+CAD $0.00)
Additional Center Reinforcing Stringers (+CAD $350.00)
Select your engine cover.
I do not need an engine cover (+CAD $0.00)
Aluminum Structure for Standard Engine Cover (+CAD $400.00)
Use these accessories to build the rest of your engine cover.
3/4" Coosa Composite 4ft x 8ft (+CAD $450.00)
Stainless Hinges (Pair) (+CAD $100.00)
Engine Cover Latches (Pair) (+CAD $130.00)
Gas-Strut Lifter (+CAD $100.00)
Select your engine cover.
I do not need an engine cover (+CAD $0.00)
Aluminum Structure for Standard Engine Cover (+CAD $500.00)
Aluminum Structure for Rear Seat Engine Cover (+CAD $950.00)
Use these accessories to build the rest of your engine cover.
3/4" Coosa Composite 5x12 (+CAD $829.00)
Stainless Hinges (Pair) (+CAD $100.00)
Engine Cover Latches (Pair) (+CAD $130.00)
Gas-Strut Lifter (+CAD $100.00)
Use these accessories to build the rest of your engine cover.
3/4" Coosa Composite 5x12 (+CAD $829.00)
Stainless Hinges (Pair) (+CAD $100.00)
Engine Cover Latch (Single) (+CAD $65.00)
Gas-Strut Lifter (+CAD $100.00)
Please choose from one of our available intake options. Our Minijet Die Cast Intake Assembly includes a billet CNC cut pump adapter to suit your donor PWC jet drive, various driveshaft supports, and all of the hardware and sealant required to install it into your hull.
I do not need an intake (+CAD $0.00)
Minijet Die Cast Intake - No Intake Grate (+CAD $1,650.00)
Minijet Die Cast Intake - With Fixed Intake Grate (+CAD $1,850.00)
Minijet Die Cast Intake - With Fixed Performance Intake Grate (+CAD $2,050.00)
Minijet Die Cast Intake - With EZ Clean Intake Stomp Grate (+CAD $2,195.00)
Minijet Die Cast Intake - With EZ Clean Performance Intake Stomp Grate (+CAD $2,395.00)
Our Minijet intake base includes two integrated drain plugs as a standard feature. These drain plugs sit at the lowest point in your hull for easy water removal and bilge cleaning. If you do not want these integrated drain plugs we can exclude them, or we can provide you with separate plugs and drain tubes to be installed in your transom.
Integrated drain plugs included in base of Minijet Intake. (+CAD $0.00)
Separate drain tubes and plugs to be installed in transom. (+CAD $50.00)
I do not need drain plugs where I am going. (+CAD $0.00)
Without a Minijet intake base, you will need separate drain plugs to help evacuate water from the inside of your hull.
I do not need drain plugs where I am going. (+CAD $0.00)
Separate drain tubes and plugs to be installed in transom. (+CAD $50.00)
Let us know if you want us to weld and assemble your kit on your own, or if you would like us to help get things started. Please note that pre-welding a hull increases lead times and shipping costs.
DIY - You Weld It All (excludes all welding and assembly labour) (+CAD $0.00)
We Weld Your Hull (Includes windscreen, intake, and hull options. Excludes engine cover assembly) (+CAD $3,800.00)
We Weld it All (Includes windscreen, intake, hull options, and engine cover) (+CAD $4,000.00)
Let us know if you want us to weld and assemble your kit on your own, or if you would like us to help get things started. Please note that pre-welding a hull increases lead times and shipping costs.
DIY - You Weld It All (excludes all welding and assembly labour) (+CAD $0.00)
We Weld Your Hull (Includes windscreen, intake, and hull options. Excludes engine cover assembly) (+CAD $3,800.00)
We Weld it All (Includes windscreen, intake, hull options, and engine cover) (+CAD $4,000.00)
Let us know if you want us to weld and assemble your kit on your own, or if you would like us to help get things started. Please note that pre-welding a hull increases lead times and shipping costs.
DIY - You Weld It All (excludes all welding and assembly labour)
We Weld Your Hull (Includes windscreen, intake, and hull options. Excludes engine cover assembly) (+CAD $5,000.00)
Let us know if you want us to weld and assemble your kit on your own, or if you would like us to help get things started. Please note that pre-welding a hull increases lead times and shipping costs.
DIY - You Weld It All (excludes all welding and assembly labour)
We Weld Your Hull (Includes windscreen, intake, and hull options. Excludes engine cover assembly) (+CAD $5,000.00)
We Weld it All (Includes windscreen, intake, hull options, and engine cover) (+CAD $5,510.00)
Let us know if you want us to weld and assemble your kit on your own, or if you would like us to help get things started. Please note that pre-welding a hull increases lead times and shipping costs.
DIY - You Weld It All (excludes all welding and assembly labour) (+CAD $0.00)
We Weld Your Hull (Includes windscreen, intake, and hull options. Excludes engine cover assembly) (+CAD $5,000.00)
We Weld it All (Includes windscreen, intake, hull options, and engine cover) (+CAD $5,510.00)
Our swim deck is designed to allow for easy re-boarding in the water or at the beach. Add our optional flush-folding swim ladder kit for even easier access.
Standard Swim Deck (+CAD $0.00)
Minijet Flush-Folding Swim Ladder - DIY Kit (+CAD $600.00)
Minijet Flush-Folding Swim Ladder - Installed (+CAD $800.00)
This special impact resistant plastic is formulated to provide maximum protection for your hull. For DIY kits we provide this material as flat sheets, with all necessary installation hardware.
I do not need UHMW Hull Protection (+CAD $0.00)
UHMW Sheets and Installation Hardware - DIY Kit (+CAD $905.00)
This special impact resistant plastic is formulated to provide maximum protection for your hull. For welded hulls we offer this material as a kit, or we can install it for you.
I do not need UHMW Hull Protection (+CAD $0.00)
UHMW Sheets and Installation Hardware - DIY Kit (+CAD $905.00)
UHMW Hull Protection - Installed (+CAD $2,150.00)
This special impact resistant plastic is formulated to provide maximum protection for your hull. For DIY kits we provide this material as flat sheets, with all necessary installation hardware.
I do not need UHMW Hull Protection (+CAD $0.00)
UHMW Sheets and Installation Hardware - DIY Kit (+CAD $1,560.00)
This special impact resistant plastic is formulated to provide maximum protection for your hull. For welded hulls we offer this material as a kit, or we can install it for you.
I do not need UHMW Hull Protection (+CAD $0.00)
UHMW Sheets and Installation Hardware - DIY Kit (+CAD $1,560.00)
UHMW Hull Protection - Installed (+CAD $3,000.00)
Would you like to add a steering components to your kit?
Choose a steering wheel option for your kit.
I do not need a steering wheel (+CAD $0.00)
Batwing Steering Wheel (+CAD $65.00)
Round Steering Wheel (+CAD $120.00)
Our round steering wheel is available in a range of colors. Please select one of the following options.
Red
Blue
Green
Aluminum
Smoke
Black
Choose from one of our three steering helm options.
Minijet Steering Helm (+CAD $250.00)
JBS Helm (including Bezel) (+CAD $320.00)
JBS Tilt Helm (including Bezel) (+CAD $495.00)
When using a batwing style steering wheel and a JBS helm, you will need a steering hub adapter to join these two components. We have automatically added this 3-hole steering hub to your quote.
3 Hole (+CAD $65.00)
When using a round style steering wheel and a JBS helm, you will need a steering hub adapter to join these two components. We have automatically added this 6-hole steering hub to your quote.
6 Hole (+CAD $65.00)
Please select your hull size from the options above. Once a hull size is selected our kit builder will provide appropriate steering cable options.
For our 10ft hull we recommend a 12ft long steering cable. Please contact us if you have cable sizing questions
Recommended 12ft Steering Cable (+CAD $255.00)
Optional Extra Long 13ft Steering Cable (+CAD $260.00)
For our 11ft hull we recommend a 13ft long steering cable. Please contact us if you have cable sizing questions
Optional Short 12ft Steering Cable (+CAD $255.00)
Recommended 13ft Steering Cable (+CAD $260.00)
Optional Long 14ft Steering Cable (+CAD $265.00)
For our 12ft hull we recommend a 14ft long steering cable. Please contact us if you have cable sizing questions
Optional Short 13ft Steering Cable (+CAD $260.00)
Recommended Standard 14ft Steering Cable (+CAD $265.00)
Optional Long 15ft Steering Cable (+CAD $270.00)
We recommend adding a steering cable extension and steering cable end. A Cable Seal is also useful when using your Minijet in freezing temperatures or salt water enviroments.
Steering Cable Extension (+CAD $20.00)
Steering Cable End (+CAD $24.00)
Steering Cable Seal (+CAD $60.00)
Would you like to add a Throttle components to your kit?
Please input your donor information in the sections provided above. Once you have input your donor information our kit builder will provide appropriate throttle options.
Please select the type of throttle control that works best for you.
Finger Throttle
Console / Lever Throttle
Foot Pedal Throttle
For Seadoo engines we offer the following options for electronic finger throttle, or cable actuated finger throttle controls.
Cable Throttle Finger-Control convert to Electric Sensor Control (+CAD $350.00)
Electric Throttle Finger-Control (+CAD $275.00)
Cable Throttle Finger-Control and Throttle Cable Kit (+CAD $190.00)
For finger throttle installation we recommend the following components. Cable fabrication work will be required to adapt this cable to work with various throttle bodies or throttle position sensors.
Finger Throttle Lever (+CAD $90.00)
Minijet Throttle Cable Kit (+CAD $100.00)
For console / lever throttle installations we recommend the following components. Some extra fabrication work will be required to make this cable work with various console throttles, engine throttle bodies, or throttle position sensors.
Console Throttle Lever
Minijet Throttle Cable Kit (+CAD $100.00)
For foot throttle installations we recommend the following components. Some extra fabrication work will be required to make this cable and foot pedal work with various engine throttle bodies or throttle position sensors.
Minijet Foot Throttle (+CAD $500.00)
Minijet Throttle Cable Kit (+CAD $100.00)
Would you like to add trim and reverse control components to your kit?
Please select a hull size from the options above. Once a hull size is selected our kit builder will provide appropriate trim and reverse options.
Please select a donor manufacturer from the options above. Once a donor manufacturer is selected our kit builder will provide appropriate trim and reverse options.
We do not recommend using an aftermarket reverse bucket with OEM electronic reverse controls. If you would like to retain the OEM electronic reverse control it is best to retain the OEM reverse bucket as well. If you would like to use an aftermarket reverse bucket we recommend installing manual cable controls.
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Posi Tilt & Trim Nozzle with Reverse Bucket (+CAD $2,250.00)
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
10ft Trim Control Cable (+CAD $150.00)
10ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Posi Tilt & Trim Nozzle with Reverse Bucket (+CAD $2,250.00)
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
11ft Trim Control Cable (+CAD $150.00)
11ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Posi Tilt & Trim Nozzle with Reverse Bucket (+CAD $2,250.00)
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
12ft Trim Control Cable (+CAD $155.00)
12ft Reverse Control Cable (+CAD $155.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend re-using your OEM Seadoo iBR controls. Use this mount to attach the OEM iBR sensor to your new steering wheel.
Electronic Finger Reverse Control Lever (+CAD $275.00)
Based on your inputs we recommend re-using your OEM Sea-doo trim controls, with a manual reverse control lever and cable using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
10ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Minijet Sea-doo Switch Housing (+CAD $240.00)
Based on your inputs we recommend re-using your OEM Sea-doo trim controls, with a manual reverse control lever and cable using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
11ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Minijet Sea-doo Switch Housing (+CAD $240.00)
Based on your inputs we recommend re-using your OEM Sea-doo trim controls, with a manual reverse control lever and cable using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
12ft Reverse Control Cable (+CAD $155.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Minijet Sea-doo Switch Housing (+CAD $240.00)
Based on your inputs we recommend re-using your OEM Yamaha RiDE system by relocating the control motor inboard and using the same control sensors. This can be accomplished with the following components. Feel free to add or remove any of these components by clicking on each option.
Yamaha RiDE Motor Relocate Kit (+CAD $660.00)
Trim and Reverse Cable Seal (QTY 2) (+CAD $120.00)
Cable Finger Lever (+CAD $90.00)
Minijet Throttle Cable Kit (+CAD $100.00)
Based on your inputs we recommend re-using your OEM trim controls, with a manual reverse control lever and cable using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
10ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Waterproof Switches for Trim Controls (QTY 2) (+CAD $30.00)
Based on your inputs we recommend re-using your OEM trim controls, with a manual reverse control lever and cable using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
11ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Waterproof Switches for Trim Controls (QTY 2) (+CAD $30.00)
Based on your inputs we recommend re-using your OEM trim controls, with a manual reverse control lever and cable using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
12ft Reverse Control Cable (+CAD $155.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Waterproof Switches for Trim Controls (QTY 2) (+CAD $30.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
10ft Trim Control Cable (+CAD $150.00)
10ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
11ft Trim Control Cable (+CAD $150.00)
11ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
12ft Trim Control Cable (+CAD $155.00)
12ft Reverse Control Cable (+CAD $155.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
10ft Reverse Control Cable (+CAD $150.00)
Electronic Trim Actuator Kit (+CAD $625.00)
Waterproof Switches for Trim (QTY 2) (+CAD $30.00)
Trim / Reverse Cable Threaded End (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
11ft Reverse Control Cable (+CAD $150.00)
Electronic Trim Actuator Kit (+CAD $625.00)
Waterproof Switches for Trim (QTY 2) (+CAD $30.00)
Trim / Reverse Cable Threaded End (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
12ft Reverse Control Cable (+CAD $155.00)
Electronic Trim Actuator Kit (+CAD $650.00)
Waterproof Switches for Trim (QTY 2) (+CAD $30.00)
Trim / Reverse Cable Threaded End (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Based on your inputs we recommend re-using your OEM Sea-doo trim controls, with a manual reverse control lever, cable, and an aftermarket reverse bucket using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
10ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Universal Reverse Bucket (+CAD $480.00)
Minijet Sea-doo Switch Housing (+CAD $240.00)
Based on your inputs we recommend re-using your OEM Sea-doo trim controls, with a manual reverse control lever, cable, and an aftermarket reverse bucket using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
11ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Universal Reverse Bucket (+CAD $480.00)
Minijet Sea-doo Switch Housing (+CAD $240.00)
Based on your inputs we recommend re-using your OEM Sea-doo trim controls, with a manual reverse control lever, cable, and an aftermarket reverse bucket using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
12ft Reverse Control Cable (+CAD $153.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Universal Reverse Bucket (+CAD $480.00)
Minijet Sea-doo Switch Housing (+CAD $240.00)
Based on your inputs we recommend re-using your OEM trim controls, with a manual reverse control lever, cable, and an aftermarket reverse bucket using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
10ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Universal Reverse Bucket (+CAD $480.00)
Waterproof Switches for Trim Controls (QTY 2) (+CAD $30.00)
Based on your inputs we recommend re-using your OEM trim controls, with a manual reverse control lever, cable, and an aftermarket reverse bucket using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
11ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Universal Reverse Bucket (+CAD $480.00)
Waterproof Switches for Trim Controls (QTY 2) (+CAD $30.00)
Based on your inputs we recommend re-using your OEM trim controls, with a manual reverse control lever, cable, and an aftermarket reverse bucket using the following components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
12ft Reverse Control Cable (+CAD $154.00)
Trim / Reverse Cable Extension Kit (+CAD $20.00)
Trim / Reverse Cable End (+CAD $24.00)
Trim / Reverse Cable Seal (+CAD $60.00)
Universal Reverse Bucket (+CAD $480.00)
Waterproof Switches for Trim Controls (QTY 2) (+CAD $30.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
10ft Trim Control Cable (+CAD $150.00)
10ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Universal Reverse Bucket (+CAD $480.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
11ft Trim Control Cable (+CAD $150.00)
11ft Reverse Control Cable (+CAD $150.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Universal Reverse Bucket (+CAD $480.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
Dual Manual Control Lever for Reverse & Trim (+CAD $939.00)
12ft Trim Control Cable (+CAD $155.00)
12ft Reverse Control Cable (+CAD $155.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Universal Reverse Bucket (+CAD $480.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
10ft Reverse Control Cable (+CAD $150.00)
Electronic Trim Actuator Kit (+CAD $625.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Universal Reverse Bucket (+CAD $480.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
11ft Reverse Control Cable (+CAD $152.00)
Electronic Trim Actuator Kit (+CAD $625.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Universal Reverse Bucket (+CAD $480.00)
Based on your inputs, we recommend the following package of trim and reverse control components. Feel free to add or remove any of these components by clicking on each option.
SSS Manual Control Lever - Single Reverse (+CAD $539.00)
12ft Reverse Control Cable (+CAD $155.00)
Electronic Trim Actuator Kit (+CAD $625.00)
Trim / Reverse Cable Threaded End (QTY 2) (+CAD $48.00)
Trim / Reverse Cable Extension Kit (QTY 2) (+CAD $40.00)
Trim / Reverse Cable Seals (QTY 2) (+CAD $120.00)
Universal Reverse Bucket (+CAD $480.00)
Would you like to add seats to your kit?
Please select a hull size and engine cover from the options above. Once a hull size and engine cover is selected our kit builder will provide appropriate seating options.
Choose the seating option that is best for you.
Premier Low Back Bucket Seats (Pair) (+CAD $1,150.00)
Premier Low Back Bench Seat (+CAD $1,050.00)
GTSE High Back Bucket Seats (Pair) (+CAD $1,500.00)
GTSE High Back Bench Seat (+CAD $1,450.00)
Other Seat Configuration - Please Specify Below
Choose the seating option that is best for you.
Premier Low Back Bucket Seats (Pair) (+CAD $1,150.00)
Premier Low back Bench Seat (+CAD $1,100.00)
GTSE High Back Bucket Seats (Pair) (+CAD $1,500.00)
GTSE High Back Bench Seat (+CAD $1,500.00)
Other Seat Configuration - Please Specify Below
Choose the seating option that is best for you.
Front Premier Low Back Bucket Seats (Pair) (+CAD $1,150.00)
Front Premier Low Back Bench Seat (+CAD $1,100.00)
Front GTSE High Back Bucket Seats (Pair) (+CAD $1,500.00)
Front GTSE High Back Bench Seat (+CAD $1,500.00)
Other Front Seat Configuration - Please Specify Below
Choose the seating option that is best for you.
I do not want any rear seats (+CAD $0.00)
Vinyl Material for DIY Rear Seat Cushions (+CAD $450.00)
Minijet Rear Seat Cushions (+CAD $1,500.00)
Other Rear Seat Configuration - Please Specify Below
Please write a request and we can contact you with more details. Specify the Following: Stitch Color Piping Color Back Color Center Color Arm Color
We can make further customizations to your seats with the following optional upgrades. The prices presented below represent the cost to upgrade a pair of seats. Please contact us for more options and upgrades if you are interested.
We build under-seat storage boxes that are great for stowing things like safety equipment and more, as well as options for easy seat mounting.
Narrow Minijet Seat Boxes with Hinged Mounts for PRP Bucket Seats (Pair) (+CAD $380.00)
Wide Minijet Seat Box with Hinged Mounts for PRP Bench Seat (+CAD $380.00)
I do not need seat boxes or seat mounts (+CAD $0.00)
Would you like any extras?
12 inch Hand Rails (Pair) (+CAD $102.00)
18 inch Stainless Hand Rails (Pair) (+CAD $124.00)
24 inch Stainless Hand Rails (Pair) (+CAD $148.00)
Bolt On Bow Eye (+CAD $20.00)
Ski Tow Ring (+CAD $65.00)
Transom Tiedowns (+CAD $40.00)
Blower Kit (+CAD $140.00)
Automatic Bilge Pump Kit (+CAD $275.00)
Secondary Switched Bilge Pump (+CAD $250.00)
Minijet Switch Panel Kit (+CAD $200.00)
Stainless Cup Holder (Pair) (+CAD $40.00)
Stainless Cup Holder (Set of 4) (+CAD $80.00)
Glove Box (+CAD $200.00)
Navigation Light Kit (Red, Green and White LED) (+CAD $60.00)
Stainless Cleats (Pair) (+CAD $200.00)
Stainless Cleats (Set of 4) (+CAD $400.00)
Battery Box with straps (+CAD $60.00)
Minijet Sand Trap Kit (+CAD $220.00)
Minijet 3 inch Cold-Air Intake (+CAD $200.00)
Minijet 4inch Cold-Air Intake (+CAD $250.00)
Soundown Sheet (32" x 54") (+CAD $150.00)
We also highly recommend these
Dry Suit (+CAD $1,080.00)
Sena Mesh Communicator
Sena Mesh Communicator for Helmet (+CAD $495.00)
Neoprene Gloves (+CAD $40.00)
Product total
Options total
Grand total
Add to quote
This product is already in your quote request list.
Browse the list
Add to wishlist
Categories: Boats, New
Share:

Related products

Minijet Products No watermark 515
Minijet Products No watermark 516

Window Wiper Motor

CAD $225.00
Heavy duty 12V window wiper motor suitable for marine use.
  • Slow and fast wiping speeds
  • Adjustable sweep angles; 40, 50, 60, 70, 80, 90, 100, or 110 degrees
  • Adjustable parking in left or right positions
  • Isolated ground wire for metal, plastic, or wooden boats
  • 316 SS wiper shaft
  • 304 SS mounting plate
  • Black powder coated body
Add to wishlist
Add to cart
hats c 0
MINIJET GREY LONG SLEEVE MALE 3

Minijet Hat

CAD $25.00
Adjustable trucker-style snap-back hats with embroidered Minijet Logo.
Add to wishlist
Select options
CKX Titan Airflow 00
CKX Titan Airflow 01

CKX Titan Airflow Helmet

CAD $499.00
The CKX Titan Airlfow is our favourite helmet for adventure boating. With lots of adjustable vent openings, a set of removable goggles, and a flip-open muzzle, these helmets are great for any conditions. It's also super easy to install our range of Sena communication equipment into these helmets, or strap a go-pro onto the included mounting point. Helmets are available as a special order item, and they are available in a range of sizes and colours. Please contact us to discuss stock and lead times for these helmets.
Add to wishlist
Select options
Emergency Paddle 1
Emergency Paddle 3

Collapsible Emergency Paddles

CAD $22.00
These plastic and aluminum paddles are perfect for small boats with limited storage options. They fold down into a compact size and can be extended for use. The hooked handle ends can also be helpful for catching lines and docks.
Add to wishlist
Add to cart
sikaflex291 3212

Sikaflex – 291 – Marine Sealant

CAD $20.00
Sikaflex 291 is a professional marine adhesive and sealant used by boat builders around the world. It can be used above and below the waterline, bonds well to metals, woods, and other marine products, and it forms an elastic / vibration resistant bond between components. This grey sealant is also a close color match with surrounding aluminum panels, and it can be sanded and painted to match surrounding areas if required. We recommend Sikaflex 291 for sealing cable pass throughs, pump adapter plates, and joints between your intake base plate, intake housing, and transom. Sikaflex 291 is not recommended for use with plastics that are prone to stress cracking (e.g. plexiglass, polycarbonate, etc.) This product is sold as a 300ml (10.1 fl.oz) tube that is compatible with common caulking guns.
Add to wishlist
Add to cart
01
02

Canvas Cover Snap Puller

CAD $49.00
Has your boat cover shrunken over time? Do you struggle to get your cover clipped into position? This tool is for you! This canvas cover snap puller tool gives you the extra leverage you need to get those stubborn snap covers into position. This tool can be used to pull snaps and covers into position during installation, and can also help to lift stubborn snaps during cover removal.
Add to wishlist
Add to cart
00
01

Minijet A2-12 Welded Hull

CAD $19,564.00
We are now offering our most popular A2-12 model as a complete welded hull package. This package includes:
  • Minijet A2-12 fully welded hull
  • 1/2" Thick UHMW hull protection - Installed
  • Low profile windscreen frame - Installed.
  • Lexan window inserts and attachment hardware - loose components
  • Minijet Die Cast Intake with EZ clean intake stomp grate - Installed.
  • Your choice of intake driveshaft supports to suit Yamaha, Seadoo, or Kawasaki driveshaft installations - loose components.
  • Your choice of engine mount kits for Yamaha, Seadoo, or Kawasaki Engine installation - Loose components.
  • Integrated rear seat engine cover - Installed
  • Coosa composite floor panel and rear engine cover lid - Installed.
  • Engine cover hinges, latch, and retention cable - Installed.
Add to wishlist
Select options
Add to quote
This product is already in your quote request list.
Browse the list
OEM Seadoo Spark Wear Ring 2
OEM Seadoo Spark Wear Ring 1

Sea-Doo SPARK Plastic Wear Ring – 140mm

CAD $100.00
Plastic wear ring for 140mm Sea-Doo SPARK jet pumps. This wear ring is an OEM replacement for 140mm Sea-Doo SPARK
Add to wishlist
Add to cart

How to reach us

Phone : +1 613 605 BOAT (2628)
Email : sales@minijet.ca

Policies

  • Returns / Cancellation
  • Shipping
  • Privacy / Terms of Service

Quick Links

  • Shop
  • Cart
  • Checkout
  • My Account
  • Pending Quotes
Copyright © 2022. Minijet INC. All Rights Reserved.

Proudly Powered By KBMedia

  • Menu
  • Categories
  • Boats
  • Controls
  • Hardware
  • Communication
  • Electrical
  • Engine
  • Promotional products
  • Pump
  • Home
  • Our Jetboats
    • NEW 2023 Turn Key Models
    • Current 2022 Turn Key Models
    • DIY Kit Models
    • Our Partners
    • Discontinued Models
  • Shop
  • Video Gallery
  • FAQ
  • About us
  • Contact us
  • Wishlist
  • Compare
  • Login / Register

Sign in

close

Lost your password?

No account yet?

Create an Account
Facebook Instagram YouTube
function insertAfter(referenceNode, newNode) { referenceNode.parentNode.insertBefore(newNode, referenceNode.nextSibling); } var el = document.createElement("div"); el.innerHTML = "
Grand total:
"; var div = document.getElementsByClassName("wapf-product-totals"); insertAfter(div, el);
Shop
0 Wishlist
0 items Cart
My account