KLS Sand Trap
CAD $ 545.00
This traditional style jetboat sand trap from KLS is a great option for removing sand and debris from your cooling water supply. Some users prefer this sand trap because it allows un-filtered water to bypass the system when full, compared to other sand traps which will slow or stop water flow when full.
Our Minijet Sand Trap Kit uses a filter element that is easily removable for cleaning, and ensures no particulate matter gets through.
Description
Featuring 3/4″ female NPT inlet and outlet threads this sand trap can be easily adapted to match the size of your cooling lines with the included barbed adapters.
Package Contains:
QTY 1 – KLS sand trap w mounting bracket & drain valve
QTY 2 – 3/4″ NPT to hose barb (of selected size)
Please Note:
We recommend the use of sealing tape (not included) on the threads of the barbed adaptors prior to installation.
Mounting hardware is not included
Additional information
| Weight | 2.6 kg |
|---|---|
| Dimensions | 40 × 18 × 18 cm |
You may also like…
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Related products
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.
HD Battery Retainer Strap Pair
Much stronger and slightly shorter than OEM straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
These straps can be added to the Minijet Battery Box incase your donor PWC does not have OEM straps to use.
(Battery Box sold separately).
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
Traditional SSS Sand Trap
Traditional style jetboat sand trap. Some users prefer this sand trap because it is less prone to clogging, however it does allow some particulate matter into the cooling loop.
Our Minijet Sand Trap Kit uses a filter element that is easily removeable for cleaning, and removes more particulate matter.
