Additional information
| Weight | 8 kg |
|---|---|
| Dimensions | 80 × 50 × 25 cm |
Hot
JBS Steering – System Builder
CAD $616.00
This tool helps you select the different options to build a complete JBS steering kit from your steering wheel, all the way to your jet nozzle.
Steering Wheel
Pick from a variety of steering wheel styles and colors
Helm
Two JBS steering helm options to choose from, tilting or non-tilting.
Steering Hub Adapter
You can purchase 3 hole hub for Batwing Wheel or the 6 hole bolt pattern – 6x70mm for the Round Wheel.
Steering Cable
Choose a steering length cable that is suitable for your boat. This length is often 2ft longer than your overall hull length (i.e. an 11ft boat uses a 13ft long steering cable).
Steering Cable End
Add a threaded steering cable end to connect this cable to a steering nozzle. Thread size: 5/16″ – 24 UNF female thread.
Steering Cable Extension
A threaded steering cable extension may be required to bridge the distance between the steering cable and jet nozzle. This add-on kit includes a 5/16″ – 24 UNF – 4 inch length piece of threaded rod with a coupling nut and 2 jam nuts.
Cable Seal
Cable Seals can prevent water ingress of the sheathing of the cables. Water inside the cables can possibly cause early failure or possible seizures in freezing temperatures.
Additional information
Related products
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Minijet Foot Throttle
Durable solid-aluminum throttle pedal available with different throttle cable travel lengths.
This pedal is compatible with 3300 series push-pull control cables - suitable for large engine installation. For all PWC engine installations we recommend using our standard throttle cable kit and attaching it in place of a 3300 series cable.
Please note: We do not keep this item in our regular stock, and each foot throttle is custom made to order. We will confirm an approximate lead time for each foot throttle when an order is placed. By placing an order for a foot throttle you acknowledge that this product is a custom piece and cannot be canceled or refunded.
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
