Showing 1–24 of 150 results

Minijet A2 Series – Kit Builder

Our kit builder tool allows you to configure different options and accessories for our 10ft, 11ft, or 12ft A2 Series kits and welded hulls. This kit builder tool works on a logic system similar to a ladder, each selection you make or product that you click will take you to the next rung of the ladder. If you move backwards or change a previous selection you will step back down the ladder and may need to re-enter certain selections due to the changes you have made. Once you've assembled a kit of products that you are happy with you can proceed to checkout to pay a deposit for your order, or you can add it to a quote. With both of these options your order is submitted to us for review and we will contact you to discuss the details of your order, forecast lead times, shipping options, and to discuss any questions that you might have.
Select options

Minijet A2-12 Welded Hull

CAD $19,564.00
We are now offering our most popular A2-12 model as a complete welded hull package. This package includes:
  • Minijet A2-12 fully welded hull
  • 1/2" Thick UHMW hull protection - Installed
  • Low profile windscreen frame - Installed.
  • Lexan window inserts and attachment hardware - loose components
  • Minijet Die Cast Intake with EZ clean intake stomp grate - Installed.
  • Your choice of intake driveshaft supports to suit Yamaha, Seadoo, or Kawasaki driveshaft installations - loose components.
  • Your choice of engine mount kits for Yamaha, Seadoo, or Kawasaki Engine installation - Loose components.
  • Integrated rear seat engine cover - Installed
  • Coosa composite floor panel and rear engine cover lid - Installed.
  • Engine cover hinges, latch, and retention cable - Installed.
Select options

Minijet Electronic Finger Control Levers

CAD $295.00CAD $590.00
Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way. Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions. This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you. Please note this product does not include the electronic throttle or iBR sensors.

SACO Dual Row Impeller

CAD $1,600.00
This thick blade dual row impeller is designed to take a beating, and outlast the competition in harsh conditions.
  • Cast 2205 duplex stainless steel
  • Thick blades for durability
  • Two rows of blades for ultimate slip resistance
  • Statically balanced
  • Easy retro-fit for various single stage jet ski pumps.
Select the appropriate part number and pitch for your application.

Sea-Doo Plastic Wear Ring

CAD $92.00
Sea-Doo plastic wear ring for various jet pump sizes. This wear ring is a direct replacement, or OEM equivalent of the wear rings installed in Sea-Doo jet pumps. Please select the appropriate diameter below.

Sea-Doo SPARK Plastic Wear Ring – 140mm

CAD $100.00
Plastic wear ring for 140mm Sea-Doo SPARK jet pumps. This wear ring is an OEM replacement for 140mm Sea-Doo SPARK

Sea-Doo SPARK Stainless Steel Wear Ring – 140mm

CAD $325.00
Stainless steel wear ring for 140mm Sea-Doo SPARK jet pumps. This wear ring is a direct upgrade for 140mm Sea-Doo

Sea-Doo Stainless Steel Wear Ring

CAD $325.00
Stainless steel wear ring for Sea-Doo jet pumps. This wear ring is a direct upgrade for Sea-Doo jet pumps, offering longer life and improved performance for Minijet boat use.   Please select the appropriate diameter below.

Yamaha Stainless Steel Wear Ring

CAD $375.00CAD $675.00
Stainless steel wear ring for Yamaha jet pumps. This wear ring is a direct upgrade for Yamaha jet pumps, offering longer life and improved performance for Minijet boat use.   Please select the appropriate diameter below.

Minijet Inc Die Cast Intake Kit

CAD $1,650.00CAD $2,395.00
Our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish. All Minijet Cast Intake Assemblies Include:
  • QTY 1 Solid cast aluminum base plate / weld-in ring.
  • QTY 1 Solid cast aluminum intake housing.
  • QTY 1 Driveshaft support to suit your donor PWC equipment. Compatible mounts are available for; Seadoo, Yamaha, Honda, Kawasaki, and Polaris driveshaft systems.
  • QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump. Adapters are available for; Seadoo, Yamaha, Honda, Kawasaki, and Polaris pumps ranging from 148mm to 160mm diameters .
  • QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
  • QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
  • All necessary installation hardware.
  • Installation & setup instructions (printed or digital).
Options include:
  • Fixed Intake Grate
  • EZ Clean Intake Stomp Grate
  • No drain holes in intake base plate (optional exclusion)
  • High performance upgrade package with Fixed Intake Grate **
  • High performance upgrade package with EZ Clean Intake Stomp Grate**
Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing.  

Trimmable Posi Nozzle

CAD $1,595.00

Trimmable Posi Nozzles for all major PWC brands.

These increase thrust in corners as the design does not allow for a loss of thrust out the side of the nozzle. With the huge range of trim you can also be on plane faster and gain a higher top speed. Not to mention the awesome rooster tail!

These are a direct fit to most PWC. If you have any questions on fitment don't hesitate to contact us before ordering.

(Reverse Bucket sold separately) Bundle discount applied when your Reverse Bucket is bundled with the Posi Nozzle.

Please note: Due to high demand this product may not ship immediately, please contact us for current stock levels and shipping times.

Minijet Steering – System Builder

CAD $616.00
This tool helps you select the different options to build a complete steering kit from wheel to rudder (or nozzle, but rudder rhymes better).

SSS Manual Control Levers

CAD $449.00CAD $939.00
Manual cable control levers are a great option for taking control of trim nozzles and reverse buckets on your PWC

Minijet Hat

CAD $25.00
Adjustable trucker-style snap-back hats with embroidered Minijet Logo.

Minijet Inc Hoodie

CAD $60.00
Dark grey hoodie from Minijet INC Thank you in advance to all the people who support us by purchasing promotional gear from us!

Minijet Bypass Fittings – routes water out of hull

CAD $25.00
Our custom bypass fittings are CNC machined from 6061 T6 aluminum and black anodized for durable, long lasting sleek look.

Minijet Cold Air Intake Kit

CAD $200.00CAD $250.00
The Minijet Cold-Air intake with filter is a great way to make sure your engine is getting clean air. This kit is available in 3 inch or 4 inch tubing diameters to suit different engines.   This kit includes:
  • Vibrant classic air filter with SS hose clamp
  • Air filter mounting tube
  • 3ft of Canaflex semi-rigid air hose
  • QTY 2 stainless steel hose clamps

Minijet Premium Switch Panel

CAD $200.00
Our Billet CNC-cut aluminum switch panel is the best way to easily organize and label our marine grade electrical switches.

Steering Cable

CAD $255.00CAD $300.00
Steering cables for use in various hulls.
  • Cables are available in different lengths with 1ft length increments.
  • Cables lengths are measured from the tip of each threaded end.
  • Cables use a 5/16"-24UNF thread, suitable for use with our threaded steering cable ends and steering cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.

Trim / Reverse Control Cable

CAD $150.00CAD $190.00
Trim / Reverse control cables for use in various hulls.
  • Cables are available in different lengths with 1ft length increments.
  • Cables lengths are measured from the tip of each threaded end.
  • Cables use a 1/4″-28UNF thread, suitable for use with our threaded trim and reverse cable ends and cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.

Minijet Sand Trap kit

CAD $220.00
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it. Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.

Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.

Please choose what size Hose-barb is best fitted for your machine.

Drysuit – Level 6 Cronos

CAD $900.00
Level 6 is a Local Canadian business that we trust to keep us warm and comfortable in extreme conditions. Their Cronos Drysuit offers durability and comfort allowing us to extend our boating season until all the water is completely frozen.

Throttle cable kit

CAD $100.00
Most PWC throttle cables are less than 5 ft long and need to be extended to work in a boat. You can use this kit to fabricate your own cables and cable housings with custom lengths to suit your boat. This kit includes a variety of parts necessary to fit different donors, throttle bodies, throttle levers, etc.

UHMW Fastener Kit

CAD $120.00CAD $300.00
These bolts kits allow you to securely fasten a sheet of UHMW plastic to the bottom of your hull for extra protection. Each kit contains various lengths of 5/16"-18UNC stainless steel flathead socket cap screws, matching sealing washers, and nylon locking nuts. Together these bolts, washers, and nuts ensure a strong and leak free connection. Kits are available in a small pack for repairs or small installations. We also offer kits that are tailored to fit out 10ft, 11ft, and 12ft A2 Series hulls. Quantities for each kit size are described below.