Showing 1–36 of 79 results

Minijet Cargo Rack

USD $61.86USD $120.09
The Minijet cargo rack is ideal for storing bulky gear or extra fuel in your boat!  

Cargo Rack Length

S5 Sentinel Suspension Seat Base

USD $1,146.30
Improve the comfort of your ride with the Sentinel Suspension seat base from S5.

Minijet Flip-Up Windscreen

USD $181.95
These flip-up windscreens offer protection from wind, water, and bugs, while maintaining the low profile look of your boat. Flip the windscreen up when you want more coverage, and tuck it away when you want to sneak under bridges or into tight spaces. Designed with a universal mounting base that can reach around various windscreen profiles, and an adjustable handle and pivot clamp these windscreen fit a wide variety of boats.  

Over Center Reverse Linkage for Posi Nozzle

USD $207.43
Our new over center reverse linkage is a bolt-on upgrade for the trimmable posi nozzle and matching cast reverse bucket. This linkage mounts to existing interfaces on the body of the nozzle, and it helps to easily lift and lower the cast reverse bucket. In the lifted position, the over center linkage design locks the bucket in position. This stop the bucket from unexpectedly dropping down and throwing your boat in reverse. In the lowered position, the integrated linkage travel stops hold the reverse bucket in the perfect position for better reverse handling
 

Reverse Bucket Generation

Plastic Cleat

USD $7.28
These plastic cleats are a great addition to your boat if you're weight concious but still want to tie up to a dock.

Pop-Up Cleat – 4.5in

USD $145.56
These 4.5 inch polished pop-up cleats are an easy way to keep you boat looking clean while maintaining functionality when needed.

Sea-Doo Fuel Pump Weld-In Ring

USD $69.14
This Sea-Doo fuel pump mounting ring is CNC cut from billet 6061 series aluminum with internal and external interfaces that match OEM plastic fuel tanks. Specifically cut with buttress threads that match the OEM fuel pump retainer ring, and an internal diameter that tightly holds the OEM fuel pump gasket, this design is better able to hold a fuel pump in position than other available products. The wide flange along the bottom edge provides a good accessible weld joint. The flange is also a closer match to most fuel tank materials, making it easier to weld materials of similar thicknesses. Please note: Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.

Captive Cupholder

USD $14.56
This cupholder has 3 rubber 'fingers' to better hold your drink

Minijet Bypass Fittings – routes water out of hull

USD $21.11
Our custom bypass fittings are CNC machined from 6061 T6 aluminum and black anodized for durable, long lasting sleek look.

Minijet Premium Switch Panel

USD $109.17
Our Billet CNC-cut aluminum switch panel is the best way to easily organize and label our marine grade electrical switches.

Minijet Sand Trap kit

USD $181.95
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it. Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.

Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.

Please choose what size Hose-barb is best fitted for your machine.

Minijet Gen 2 Baffled Blower Vent

USD $43.67
This Minijet designed Blower Vent is designed to resist ingress of water through the use of baffles. This is also available as part of our Blower Kit.

Cup Holder – Stainless Steel with Drain

USD $21.11
These stainless cupholders feature a drain in the bottom.

Cooling System Y-Fitting (for 3/4 inch diameter hose)

USD $14.56
This coolant system Y-fitting is ideal for splitting coolant water flow between two heat exchangers in a jet boat. This Y-fitting more evenly splits the water flow compared to a standard T-fitting.
  • Barbed connection suitable for hoses with 3/4 inch internal diameter.
  • Plastic material is lightweight, will not corrode.

Drain Plug (7/8 inch)

USD $7.28
Features a convenient finger-loop that can also have a tie/string, such to not forget or lose them.

3-inch Engine Compartment Blower Kit

USD $101.89
Water Resistant Turbo Blower (12v, 120 CFM), Minijet aluminum baffled vent, 4 feet of 3" blower hose and installation hardware (3 zip-ties, 4 rivets)

Adjustable Surface-Mount Cover Latch

USD $47.31
This is the recommended latch to secure engine cover.

Stainless Steel Hinge and Hardware for Engine Cover

USD $36.39
We Recommend always buying in pairs.   Each unit will come with: 1x stainless steel hinge with hinge-pin and locking ring 1x aluminum cnc-cut back plate 4x stainless steel screws- 10-24, 1.75 inch 4x stainless steel screws- 10-24, 0.75 inch 8x stainless steel nylon locking nuts   We include a CNC-cut aluminum backplate and Stainless mounting nuts and bolts.

Billet Aluminum Fuel Cap with Retainer-Chain

USD $90.98
Solid billet aluminum gas cap with retainer chain. Available in vented, or non-vented configurations. For 2" hose

Aerator Spray Head

USD $18.20
An Aerator Spray Head to better oxygenate the water in a Bait/live-well.

Aircraft Style Aluminum Fuel Cap with Retainer-Chain

USD $127.37
Solid billet aluminum gas cap with retainer chain. Non-vented.

Aluminum Weld-on Hinges

USD $10.92USD $13.10
Ideal for attaching items like windscreen doors or hatches!  

Grease Fitting Option

Automatic Bilge Pump

USD $159.39
Our fully automatic bilge pump features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
  • Capacity: 1,100 GPH
  • Volts: 12VDC
  • Amperage: 3.8 amp draw at maximum flow
  • sold with straight fitting adapters for 1" and 1-1/8" hose.
  • sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.

Bilge Hose (1-1/8in diameter, 6ft length)

USD $10.92
This bilge hose is ideal for routing your bilge water out of your hull, and it is designed to work with our automatic bilge pump and hull bypass fittings. Bilge hose has a 1-1/8in diameter and is sold in 6 foot lengths. Most boats use between 4ft and 6ft of hose. For custom length please contact us.  

Blower Hose (3in diameter, 4ft length)

USD $7.28
Blower hose is also available as part of our complete blower kit. Custom lengths are available, please contact us.

Bow Eye – Stainless 2″

USD $17.47
1/2"-13UNC Thread 3.25" thread length Shank spacing 2"

Bow Eye – Weld On

USD $7.28
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.

Bow Eye (2 Hole) – Weld On

USD $7.28
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.

Windscreen Gasket Material

USD $5.46
Windscreen gasket material ideal for windows on Minijet high-profile windscreen assemblies. This rubber gasket material is designed to work with 1/8 inch thickness aluminum panels, and 1/4 inch thickness lexan or glass window inserts. This gasket material allows the lexan or glass insert to sit outside of the aluminum panel so that it can not be pushed inwards by water, waves, or impacts. Lexan or glass inserts must be cut larger than the mating hole in order to make this gasket work correctly. After installation, the outer lip of this gasket can be folded inward on itself, locking the window inserts into position.
  • Minimum recommended distance between edge of glass and edge of body panel = 0.140 inch (glass piece should be 2 x 0.140 inch = 0.280 inch larger than the body panel opening).
  • Minimum recommended radius of body panel opening = 2.00 inch
  • Suitable for body panel thicknesses from 0.075 inch to 0.140 inch
  • Suitable for glass panel thicknesses from 0.1875 inch to 0.250 inch
We stock this gasket material as a continuous role and sell it in 1 foot increments. Please use the quantity selector to indicate the length you require in feet.

Drain Plug (3/4 inch)

USD $5.82
Features a convenient hole for a tie/string, such to not forget or lose them.

Engine Cover Strut Kit

USD $72.78
This gas-powered strut kit is perfect way to assist in lifting/opening an engine cover or heavy hatch. This kit includes a gas shock, a pair of ball ended mounting studs, and a mounting bracket with three attachment points.

Minijet Electric Trim Actuator Kit

USD $465.80
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware. This kit will still require Momentary Switches which we sell separately.

Grab Rail – Stainless Steel

USD $48.76USD $68.41
Add these sleek grab points to your boat, simply mounted by 2 studs.  

Grab Rail Length

Livewell / Baitwell Kit – (Pump, Aerator, Hose, Filter, Drain-plug)

USD $127.37
This kit includes a Wire Mesh Strainer to prevent clogging and an Aerator Spray Head to better oxygenate the water and 4 ft of hose.

Livewell / Baitwell Pump

USD $83.70
We recommend also purchasing a Wire Mesh Strainer to prevent clogging and an Aerator Spray Head to better oxygenate the water.