Minijet Sea-Doo Diamond Control Switch Housings
Minijet Sea-Doo Oblong Control Switch Housings
Minijet Inc Sea-Doo Die Cast Intake Kit
Designed specifically for Sea-Doo applications (excl. SPARK), our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 Driveshaft support to suit your donor PWC equipment.
- QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
- QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
- Installation & setup instructions (printed or digital).
- Fixed Intake Grate
- EZ Clean Intake Stomp Grate
- No drain holes in intake base plate (optional exclusion)
- High performance upgrade package with Fixed Intake Grate **
- High performance upgrade package with EZ Clean Intake Stomp Grate**
Minijet Inc Spark Cast Intake Kit
Designed specifically for the Sea-Doo SPARK, our Minijet Cast Aluminum intake kits are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package.
All Minijet Cast Intake Kits Include:
- QTY 1 Solid cast aluminum base plate / weld-in ring.
- QTY 1 Solid cast aluminum intake housing.
- QTY 1 EZ Clean Intake Stomp Grate w/ installation hardware
- QTY 1 Billet CNC machined pump adapter to suit 140mm Sea-Doo spark pump.
- QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
- All necessary installation hardware.
- Installation & setup instructions (printed or digital).
Minijet Electronic Finger Control Levers for Sea-Doo
Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way.
Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions.
This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you.
Please note this product does not include the electronic throttle or iBR sensors.
Sea-Doo Fuel Pump Weld-In Ring
This Sea-Doo fuel pump mounting ring is CNC cut from billet 6061 series aluminum with internal and external interfaces that match OEM plastic fuel tanks.
Specifically cut with buttress threads that match the OEM fuel pump retainer ring, and an internal diameter that tightly holds the OEM fuel pump gasket, this design is better able to hold a fuel pump in position than other available products.
The wide flange along the bottom edge provides a good accessible weld joint. The flange is also a closer match to most fuel tank materials, making it easier to weld materials of similar thicknesses.
Please note: Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.
Sea-Doo Stainless Steel Wear Ring
Heat Exchanger
Back in stock!
Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.
Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s) Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)
Fittings included are: 2x 3/4 inch NPT to 1 inch barb 2x 3/4 inch NPT to 3/4 inch barb
Minijet Sea-Doo Coolant Reservoir Mount
Sea-Doo Spark Gauge Cluster Mount Kit
Sea-Doo Spark Wiring Harness Extension
This pre-wired harness extension for Seadoo Spark packages allows you to extend the wiring harness to reach forward mounted dash and throttle components. This harness does not include connections for iBR / VTS control which must be extended separately. Alternatively you can purchase the extension kit for the 1503/1630 which includes the iBR connector. Length: 10ft
Sea-doo Engine Mounts
Sea-Doo Stator Housing
Stator housing for Sea-Doo 155mm, 159mm, and 161mm impellers. This stator housing includes a plastic wear ring, new stator shaft and bearings, and a new tail cone. Install your impeller, bolt it into your boat, and go boating!
Due to the many variations in part# available for this we have opted not to list each and every option with associated stock levels. We do our best to stock each possible combination, however if you need this in a rush please contact us to confirm your application and stock status prior to ordering.
Sea-Doo Plastic Wear Ring
Sea-Doo SPARK Plastic Wear Ring – 140mm
Sea-Doo SPARK Stainless Steel Wear Ring – 140mm
SOLAS 140mm Sea-Doo SPARK Impeller
SOLAS 155.5mm Sea-Doo Impeller
SOLAS 159mm Sea-Doo Impeller
SOLAS 161mm Sea-Doo 3-Blade Impeller
SOLAS 161mm Sea-Doo 4-Blade Impeller
