Showing 1–36 of 58 results

4T 5W-40 Oil Change Kit For Rotax 4-TEC & ACE 1500cc+ Engines

CAD $ 101.99
Easily change the oil on your Sea-Doo-powered mini jet boat with this complete kit!

4T 5W-40 Oil Change Kit For Rotax 900 ACE Engine

CAD $ 57.99
Easily change the oil on your Spark-powered mini jet boat with this complete kit!

Minijet 3″ Exhaust Kit for ROTAX ACE 1630 (Sea-Doo) Engines

CAD $ 395.00
Easily route the exhaust out of your Rotax powered boat with our exhaust kit, featuring pre-bead rolled exhaust tube segments and quality Vibrant silicone couplers. No welding required - simply slip and clamp all parts together!

Minijet 3″ Exhaust Kit for Yamaha 1.8L Engines

CAD $ 350.00
Easily route the exhaust out of your Rotax powered boat with our exhaust kit, featuring pre-bead rolled exhaust tube segments and quality Vibrant silicone couplers. No welding required - simply slip and clamp all parts together!

Minijet Rotax Electronic Throttle Adaptor for Ultraflex B301 Lever

CAD $ 350.00
Our Rotax Throttle Adaptor for the Ultraflex B301 Lever is the simplest and cleanest way to run this beloved helm throttle lever with a newer Sea-Doo donor that uses an electronic throttle sensor.

Minijet Sea-Doo Control Switch Panel

CAD $ 175.00
Our new Sea-Doo Control Switch Panels are the cleanest way to mount your sea-doo control switches to your dash or another flat panel in your boat. Control Switch Type

Sea-Doo Supercharger Rebuild Kit

CAD $ 589.99
Keep your supercharged Sea-Doo at peak performance with this Supercharger Rebuild Kit. This kit includes everything you need for a

Yamaha Angled Isolators

CAD $ 70.00$ 250.00
Conveniently re-use your OEM engine brackets and switch to these angled isolators.

Yamaha Fuel Pump Weld-In Ring

CAD $ 30.00
Easily install a Yamaha PWC fuel pump into your custom fuel tank!

Yamaha Poly Isolators

CAD $ 85.00$ 305.00
Upgrade the durability and stiffness of your engine mounts with these straight polymer engine mounts - a drop in replacement for almost all 4-stroke Yamaha engines.

Yamaha Wiring Harness Extension

CAD $ 650.00
Simply extend the cockpit controls of your Yamaha powered mini boat with our wiring harness extension! This harness extension extends the following connectors:
  • Dash connector 1
  • Dash connector 2
  • Fuel level sensor
  • Fuel pump power
  • Start switch (un-terminated on dash side)
  • Stop switch (un-terminated on dash side)

Additionally Available Connector Extensions

Yamaha Yamalube 10W-40 4W Watercraft Performance Oil Change Kit – No.1 for MR-1 Engines

CAD $ 68.95
Easily change the oil on your Yamaha MR-1 mini jet boat with this complete kit!

Yamaha Yamalube 10W-40 4W Watercraft Performance Oil Change Kit – No.2 for 1.8L Engines

CAD $ 92.95
Easily change the oil on your Yamaha 1.8L mini jet boat with this complete kit!

Yamaha Yamalube 10W-40 4W Watercraft Performance Oil Change Kit – No.3 for TR-1 Engines

CAD $ 82.95
Easily change the oil on your Yamaha TR-1 mini jet boat with this complete kit!

Minijet Sea-Doo Diamond Control Switch Housings

CAD $ 225.00$ 265.00
The Minijet Diamond Control Switch Housings allow you to re-home your OEM control switches.  

Preferred Mounting Configuration

Minijet Sea-Doo Oblong Control Switch Housings

CAD $ 125.00
The Minijet Oblong Control Switch Housings allow you to re-home your OEM control switches.  

Preferred Mounting Configuration

Minijet Inc Kawasaki Die Cast Intake Kit

CAD $ 2,150.00$ 2,695.00
Designed specifically for Kawasaki applications, our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package. All Minijet Cast Intake Kits Include:
  • QTY 1 Solid cast aluminum base plate / weld-in ring.
  • QTY 1 Solid cast aluminum intake housing.
  • QTY 1 Driveshaft support to suit your donor PWC equipment.
  • QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
  • QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
  • QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
  • All necessary installation hardware.
  • Installation & setup instructions (printed or digital).
Options include:
  • Fixed Intake Grate
  • EZ Clean Intake Stomp Grate
  • No drain holes in intake base plate (optional exclusion)
  • High performance upgrade package with Fixed Intake Grate **
  • High performance upgrade package with EZ Clean Intake Stomp Grate**
**Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing. All of our intakes are also available with pre-welded, and pre-assembled driveshaft interfaces. If you are interested in these services please contact us before placing an order online. We will discuss options and details with you before you commit to a purchase. Don't see your donor in the list of parts or options? Please get in touch with us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary. All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish.

Minijet Inc Sea-Doo Die Cast Intake Kit

CAD $ 2,150.00$ 2,695.00
Designed specifically for Sea-Doo applications (excl. SPARK), our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package. All Minijet Cast Intake Kits Include:
  • QTY 1 Solid cast aluminum base plate / weld-in ring.
  • QTY 1 Solid cast aluminum intake housing.
  • QTY 1 Driveshaft support to suit your donor PWC equipment.
  • QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
  • QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
  • QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
  • All necessary installation hardware.
  • Installation & setup instructions (printed or digital).
Options include:
  • Fixed Intake Grate
  • EZ Clean Intake Stomp Grate
  • No drain holes in intake base plate (optional exclusion)
  • High performance upgrade package with Fixed Intake Grate **
  • High performance upgrade package with EZ Clean Intake Stomp Grate**
**Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing. All of our intakes are also available with pre-welded, and pre-assembled driveshaft interfaces. If you are interested in these services please contact us before placing an order online. We will discuss options and details with you before you commit to a purchase. Don't see your donor in the list of parts or options? Please get in touch with us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary. All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish.

Minijet Inc Spark Cast Intake Kit

CAD $ 2,900.00
Designed specifically for the Sea-Doo SPARK, our Minijet Cast Aluminum intake kits are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package. All Minijet Cast Intake Kits Include:
  • QTY 1 Solid cast aluminum base plate / weld-in ring.
  • QTY 1 Solid cast aluminum intake housing.
  • QTY 1 EZ Clean Intake Stomp Grate w/ installation hardware
  • QTY 1 Billet CNC machined pump adapter to suit 140mm Sea-Doo spark pump.
  • QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
  • All necessary installation hardware.
  • Installation & setup instructions (printed or digital).
Don't see the parts that you need? Please get in touch with us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary.

Minijet Inc Yamaha Die Cast Intake Kit

CAD $ 2,150.00$ 2,695.00
Designed specifically for Yamaha applications, our Minijet Cast Aluminum intakes are at the top of their class, providing a smooth transition and flow path for all water entering your jet pump, with a sturdy base plate that can take the strongest hits in any boat. We take pride in providing our customers with a complete intake kit that fits all donors, all hulls, and solves as many problems as possible in one package. All Minijet Cast Intake Kits Include:
  • QTY 1 Solid cast aluminum base plate / weld-in ring.
  • QTY 1 Solid cast aluminum intake housing.
  • QTY 1 Driveshaft support to suit your donor PWC equipment.
  • QTY 1 Billet CNC machined pump adapter to suit your donor PWC pump.
  • QTY 2 Integrated drain plugs in base plate, ready for use at the lowest point in your hull.
  • QTY 1 tube of SikaFlex 291 marine grade sealant for final installation.
  • All necessary installation hardware.
  • Installation & setup instructions (printed or digital).
Options include:
  • Fixed Intake Grate
  • EZ Clean Intake Stomp Grate
  • No drain holes in intake base plate (optional exclusion)
  • High performance upgrade package with Fixed Intake Grate **
  • High performance upgrade package with EZ Clean Intake Stomp Grate**
**Our high-performance upgrade package includes an intake loading plate that evenly distributes water to the impeller. Flow through the intake grate is increased by using thinner 3/16 inch chamfered intake bars, and we re-surface the internal flow path of the intake housing for improved performance. This upgrade is only recommended for high performance engines and pumps above 280HP. Using thinner intake grate bars does present and increased risk of impeller damage from larger debris running through the intake housing. All of our intakes are also available with pre-welded, and pre-assembled driveshaft interfaces. If you are interested in these services please contact us before placing an order online. We will discuss options and details with you before you commit to a purchase. Don't see your donor in the list of parts or options? Please get in touch with us to discuss your specific requirements. We can help to find the correct parts that fits your needs, or design custom solutions when necessary. All of our intakes are proudly designed, cast, machined, and assembled in Canada from start to finish.

Minijet Sea-Doo Reverse Bucket Mount for Gen 3 iBR

CAD $ 295.00
Re-mount your OEM gen 3 iBR reverse bucket on the back of your boat.

Minijet Sea-Doo Universal Reverse Bucket Mount Kit

CAD $ 845.00
Improve or add the reverse performance of your non-iBR Sea-Doo powered boat.

Minijet Yamaha Air Intake Adaptor

CAD $ 100.00
Smoothly duct air from your 4 inch air filter or cold air intake to your throttle body or supercharger inlet.   Engine Model

Minijet Electronic Finger Control Levers for Sea-Doo

CAD $ 295.00
Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way. Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions. This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you. Please note this product does not include the electronic throttle or iBR sensors.

Sea-Doo Fuel Pump Weld-In Ring

CAD $ 95.00
This Sea-Doo fuel pump mounting ring is CNC cut from billet 6061 series aluminum with internal and external interfaces that match OEM plastic fuel tanks. Specifically cut with buttress threads that match the OEM fuel pump retainer ring, and an internal diameter that tightly holds the OEM fuel pump gasket, this design is better able to hold a fuel pump in position than other available products. The wide flange along the bottom edge provides a good accessible weld joint. The flange is also a closer match to most fuel tank materials, making it easier to weld materials of similar thicknesses. Please note: Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.

Sea-Doo Stainless Steel Wear Ring

CAD $ 325.00
Stainless steel wear ring for Sea-Doo jet pumps. This wear ring is a direct upgrade for Sea-Doo jet pumps, offering longer life and improved performance for Minijet boat use.   Please select the appropriate diameter below.

Yamaha Stainless Steel Wear Ring

CAD $ 675.00
Stainless steel wear ring for Yamaha jet pumps. This wear ring is a direct upgrade for Yamaha jet pumps, offering longer life and improved performance for Minijet boat use.   Please select the appropriate diameter below.

Heat Exchanger

CAD $ 349.00

Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.

Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s) Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)

Fittings included are: 2x 3/4 inch NPT to 1 inch barb 2x 3/4 inch NPT to 3/4 inch barb

Driveshaft Shortening

CAD $ 275.00
For those wishing to save room in their jetboat we offer a driveshaft shortening service. Many Yamaha based boats can gain more cockpit room and better weight distribution. It is possible to shorten some shafts by up to 12” or 300mm!! In minijet boats space is at a premium. Just simply send us your shaft (still in the jet pump) and we will measure, cut to length and machine a new spline onto the end of the shaft. If purchasing with one of our cast intakes we can do the measuring to fit the intake. If you know the length you want then contact us and we can discuss your needs.

Minijet Yamaha RiDE Relocate Kit

CAD $ 690.00
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat. Minijet Yamaha RiDE Relocate Kit Includes:
  • motor and cable mounting plate
  • QTY 2 6-foot trim and reverse cables
  • QTY 2 trim and reverse cable ends
  • QTY 2 trim and reverse cable extension kits
  • QTY 2 4300 Series Cable Mounting Clamps
  • QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC. This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.

Minijet Sea-Doo Coolant Reservoir Mount

CAD $ 40.00
The Minijet Sea-Doo coolant reservoir mount allows you to re-home your cooling bottle with no existing mounting features.  

Coolant Reservoir Type

Minijet Yamaha Clean-out Spigot Mount

CAD $ 10.00
Our Clean-out Spigot Mount neatly re-homes your donor's clean-out hose within your boat.

Yamaha Finger Throttle Adapter Kit

CAD $ 240.00
Re-locate your bulky OEM electronic Yamaha finger levers!

Yamaha Engine Mounts

CAD $ 375.00
Designed for mounting 1800cc Yamaha engines. These engine mounts are designed to work with common stringer interfaces on all Minijet A2 series hulls. This mount assembly replaces the oEM cast engine mounting brackets that are attached to the engine block, and they allow you to reuse the OEM rubber isolator mounts. Please note, these mounts are provided as a tack-welded kit. They are pre-assembled in the correct orientation to work with most engines. You must confirm this orientation and complete the remaining welding work before installing these mounts. 

Sea-Doo 1503/1630cc Wiring Harness Extension

CAD $ 650.00
Pre-wired harness extension for Seadoo 1503cc 4TEC and 1630 ACE engine packages. Length: 10ft

Sea-Doo Spark Gauge Cluster Mount Kit

CAD $ 150.00
Use this kit to re-mount your OEM Seadoo Spark gauge cluster in a new boat.
  • This kit is sold as a set of pre cut and bent components. You must weld these parts together yourself.
  • This kit only includes the aluminum pieces pictured here. It does not include a gauge cluster / screen.