Showing all 28 results

Minijet Sea-Doo Diamond Control Switch Housings

USD $163.76USD $192.87
The Minijet Diamond Control Switch Housings allow you to re-home your OEM control switches.  

Preferred Mounting Configuration

Minijet Sea-Doo Oblong Control Switch Housings

USD $90.98
The Minijet Oblong Control Switch Housings allow you to re-home your OEM control switches.  

Preferred Mounting Configuration

Over Center Reverse Linkage for Posi Nozzle

USD $207.43
Our new over center reverse linkage is a bolt-on upgrade for the trimmable posi nozzle and matching cast reverse bucket. This linkage mounts to existing interfaces on the body of the nozzle, and it helps to easily lift and lower the cast reverse bucket. In the lifted position, the over center linkage design locks the bucket in position. This stop the bucket from unexpectedly dropping down and throwing your boat in reverse. In the lowered position, the integrated linkage travel stops hold the reverse bucket in the perfect position for better reverse handling
 

Reverse Bucket Generation

Minijet Electronic Finger Control Levers for Sea-Doo

USD $214.70
Our Minijet electronic finger control levers allow you to easily re-use and re-mount the electronic throttle and iBR control sensors from your donor Seadoo. This product makes a clean and simple installation, with no extra cables or wires getting in the way. Unlike other products on the market, these electronic finger control levers do not require any modifications to the Seadoo sensor bodies, and the clamping attachment can be angled to suit different steering wheel and handlebar positions. This product is proudly designed, machined, anodized, and shipped from our home in Canada directly to you. Please note this product does not include the electronic throttle or iBR sensors.

Minijet Steering – System Builder

USD $448.33
This tool helps you select the different options to build a complete steering kit from wheel to rudder (or nozzle, but rudder rhymes better).

SSS Manual Control Levers

USD $326.79USD $683.41
Manual cable control levers are a great option for taking control of trim nozzles and reverse buckets on your PWC

Trim / Reverse Control Cable

USD $120.09USD $152.84
Trim / Reverse control cables for use in various hulls.
  • Cables are available in different lengths with 1ft length increments.
  • Cables lengths are measured from the tip of each threaded end.
  • Cables use a 1/4″-28UNF thread, suitable for use with our threaded trim and reverse cable ends and cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.

Steering Cable

USD $203.79USD $240.18
Steering cables for use in various hulls.
  • Cables are available in different lengths with 1ft length increments.
  • Cables lengths are measured from the tip of each threaded end.
  • Cables use a 5/16"-24UNF thread, suitable for use with our threaded steering cable ends and steering cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.

Throttle cable kit

USD $72.78
Most PWC throttle cables are less than 5 ft long and need to be extended to work in a boat. You can use this kit to fabricate your own cables and cable housings with custom lengths to suit your boat. This kit includes a variety of parts necessary to fit different donors, throttle bodies, throttle levers, etc.

Cable Finger Throttle Control Lever

USD $58.95
This cable finger throttle is ideally paired with a batwing wheel or handlebars.

Universal Cable Finger Throttle Lever

USD $65.50
This universal cable finger throttle lever is designed to fit a wide variety of; applications, handlebars, and engines. With 35mm of available cable travel, this throttle lever will out-pull and out-perform all other options in the market. The adjustable mounting point and mounting clamps allow users to adjust the position and angle of the lever on the steering wheel. Mounting clamps are available to fit standard 7/8" handlebars, or larger round style steering wheels. Please choose from one of the mounting clamp options listed below.

Steering Wheel – 13″ Round

USD $87.34
13 inch diameter. Available in various styles.

Minijet Steering Wheel Hub

USD $47.31
Use these hub adaptors to run our large wheel or batwing wheel on a JBS helm.   Hole Pattern

Steering Wheel – Batwing / Butterfly

USD $47.31

13” Steering wheel with provisions for finger throttle on left or right side.

Bolt pattern is 3x35mm or 3x1.378”

Minijet Steering Helm

USD $181.95
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning. The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions. The Minijet steering helm Includes:
  • Minijet steering column with integrated steering wheel adapter, and cable pass-through
  • Stainless steel steering bearings and steering bearing mount plates to attach to dash area
  • Steering cable mounting plate
  • Steering cable actuator arm with integrated steering stops
  • Steering cable connection hardware
  • Helm installation hardware
We also offer this as part of a complete Minijet Steering Kit.

JBS Steering Helm

USD $251.09
Our JBS steering helm provides 135 degree of steering wheel angle between the steering travel stops. Our JBS steering helm will require a steering wheel hub adapter (3 hole adapter for Batwing style steering wheel or 6 hole for a round wheel)

JBS Tilt Steering Helm

USD $385.01
The JBS tilting steering helm offers an adjustable steering wheel position. This helm can tilt the steering wheel 42 degrees upwards, and 6 degrees downward for different drivers. Our JBS tilt steering helm provides 135 degree of steering wheel angle between the steering travel stops. Our JBS tilt steering helm will require a steering wheel hub adapter (3 hole adapter for Batwing style steering wheel or 6 hole for a round wheel)

Minijet Electric Trim Actuator Kit

USD $465.80
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware. This kit will still require Momentary Switches which we sell separately.

Minijet Yamaha RiDE Relocate Kit

USD $502.19
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat. Minijet Yamaha RiDE Relocate Kit Includes:
  • motor and cable mounting plate
  • QTY 2 6-foot trim and reverse cables
  • QTY 2 trim and reverse cable ends
  • QTY 2 trim and reverse cable extension kits
  • QTY 2 4300 Series Cable Mounting Clamps
  • QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC. This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.

Yamaha Finger Throttle Adapter Kit

USD $174.67
Re-locate your bulky OEM electronic Yamaha finger levers!

Minijet Foot Throttle

USD $363.91
Durable solid-aluminum throttle pedal available with different throttle cable travel lengths. This pedal is compatible with 3300 series push-pull control cables - suitable for large engine installation. For all PWC engine installations we recommend using our standard throttle cable kit and attaching it in place of a 3300 series cable. Please note: We do not keep this item in our regular stock, and each foot throttle is custom made to order. We will confirm an approximate lead time for each foot throttle when an order is placed. By placing an order for a foot throttle you acknowledge that this product is a custom piece and cannot be canceled or refunded.   

Steering Cable End

USD $17.47
Thread size: 5/16" - 24 UNF female thread. Bore size: 5/16"

Steering Cable Extension

USD $14.56
This handy extension kit allows you to easily adjust the location of your Steering cable connection. Provided with an extra

Trim / Reverse Cable Extension

USD $14.56
Extend the reach of your trim or reverse cables with this extension kit.

Trim / Reverse Cable End

USD $17.47
Thread Size: 1/4" - 28UNF Female

Cable Seal

USD $43.67
Cable Seals can prevent water ingress of the sheathing of the cables. Water inside the cables can possibly cause early failure or possible seizures in freezing temperatures.

JBS Steering – System Builder

USD $448.33
This tool helps you select the different options to build a complete JBS steering kit from your steering wheel, all the way to your jet nozzle.

Minijet Sea-doo Dual Control Switch Housing

USD $174.67
Cleanly re-mount your Sea-Doo VTS/IBR switches in this billet aluminum housing.  

Donor Switch Type