-25%
Trim / Reverse Control Cable
CAD Price range: $ 150.00 through $ 235.00
Trim / Reverse control cables for use in various hulls.
- Cables are available in different lengths with 1ft length increments.
- Cables lengths are measured from the tip of each threaded end.
- Cables use a 1/4″-28UNF thread, suitable for use with our threaded trim and reverse cable ends and cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.
Description
Description
Additional information
Additional information
| Weight | 1.8 kg |
|---|---|
| Dimensions | 43 × 43 × 6 cm |
| Cable Length |
6 ft ,7 ft ,8 ft ,9 ft ,10 ft ,11 ft ,12 ft ,13 ft ,14 ft ,15 ft ,16 ft ,17 ft ,18 ft ,19 ft ,20 ft |
Related products
Universal Cable Finger Throttle Lever for M8 Barrel Adjustor
This product is currently back-ordered. We recommend purchasing Cable Finger Throttle Control Lever for M8 Barrel Adjustor - Can be made to fit our Large Steering Wheel with minor modifications to the wheel.
This universal cable finger throttle lever is designed to fit a wide variety of; applications, handlebars, and engines.
With 35mm of available cable travel, this throttle lever will out-pull and out-perform all other options in the market. The adjustable mounting point and mounting clamps allow users to adjust the position and angle of the lever on the steering wheel. Mounting clamps are available to fit standard 7/8" handlebars, or larger round style steering wheels.
Please choose from one of the mounting clamp options listed below.
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
JBS Tilt Steering Helm
The JBS tilting steering helm offers an adjustable steering wheel position. This helm can tilt the steering wheel 42 degrees upwards, and 6 degrees downward for different drivers.
Our JBS tilt steering helm provides 135 degree of steering wheel angle between the steering travel stops. Our JBS tilt steering helm will require a steering wheel hub adapter (3 hole adapter for Batwing style steering wheel or 6 hole for a round wheel)
Minijet Rotax Electronic Throttle Adaptor for Ultraflex B301 Lever
Our Rotax Throttle Adaptor for the Ultraflex B301 Lever is the simplest and cleanest way to run this beloved helm throttle lever with a newer Sea-Doo donor that uses an electronic throttle sensor.
Yamaha Wiring Harness Extension
Simply extend the cockpit controls of your Yamaha powered mini boat with our wiring harness extension!
INSTRUCTIONS
- Use the FIRST selection field to REMOVE any 'default' connectors that are not applicable to you
- Use the SECOND selection field to ADD any alternate or extra connector extensions
