Hot
Minijet Electric Trim Actuator Kit
CAD $ 645.00
Soundown
CAD Original price was: $ 230.00.$ 115.00Current price is: $ 115.00.
JBS Steering – System Builder
From $ 616.00
This tool helps you select the different options to build a complete JBS steering kit from your steering wheel, all the way to your jet nozzle.
Steering Wheel
Pick from a variety of steering wheel styles and colors
Helm
Two JBS steering helm options to choose from, tilting or non-tilting.
Steering Hub Adapter
You can purchase 3 hole hub for Batwing Wheel or the 6 hole bolt pattern – 6x70mm for the Round Wheel.
Steering Cable
Choose a steering length cable that is suitable for your boat. This length is often 2ft longer than your overall hull length (i.e. an 11ft boat uses a 13ft long steering cable).
Steering Cable End
Add a threaded steering cable end to connect this cable to a steering nozzle. Thread size: 5/16″ – 24 UNF female thread.
Steering Cable Extension
A threaded steering cable extension may be required to bridge the distance between the steering cable and jet nozzle. This add-on kit includes a 5/16″ – 24 UNF – 4 inch length piece of threaded rod with a coupling nut and 2 jam nuts.
Cable Seal
Cable Seals can prevent water ingress of the sheathing of the cables. Water inside the cables can possibly cause early failure or possible seizures in freezing temperatures.
Related products
Trim / Reverse Control Cable
Trim / Reverse control cables for use in various hulls.
- Cables are available in different lengths with 1ft length increments.
- Cables lengths are measured from the tip of each threaded end.
- Cables use a 1/4″-28UNF thread, suitable for use with our threaded trim and reverse cable ends and cable extension kits.
Universal Cable Finger Throttle Lever for M8 Barrel Adjustor
This product is currently back-ordered. We recommend purchasing Cable Finger Throttle Control Lever for M8 Barrel Adjustor - Can be made to fit our Large Steering Wheel with minor modifications to the wheel.
This universal cable finger throttle lever is designed to fit a wide variety of; applications, handlebars, and engines.
With 35mm of available cable travel, this throttle lever will out-pull and out-perform all other options in the market. The adjustable mounting point and mounting clamps allow users to adjust the position and angle of the lever on the steering wheel. Mounting clamps are available to fit standard 7/8" handlebars, or larger round style steering wheels.
Please choose from one of the mounting clamp options listed below.
JBS Tilt Steering Helm
The JBS tilting steering helm offers an adjustable steering wheel position. This helm can tilt the steering wheel 42 degrees upwards, and 6 degrees downward for different drivers.
Our JBS tilt steering helm provides 135 degree of steering wheel angle between the steering travel stops. Our JBS tilt steering helm will require a steering wheel hub adapter (3 hole adapter for Batwing style steering wheel or 6 hole for a round wheel)
Minijet Rotax Electronic Throttle Adaptor for Ultraflex B301 Lever
Our Rotax Throttle Adaptor for the Ultraflex B301 Lever is the simplest and cleanest way to run this beloved helm throttle lever with a newer Sea-Doo donor that uses an electronic throttle sensor.
